Thta would be good to have an automatic Maintenance reminder after a certain number of printing . Thta would ease the whole tasks that need to be done.
Hi, automatic maintenance reminders are highly desirable, though the trigger “after a certain number of printing” would need further review. A batch of ten print jobs can include short 5‑minute parts as well as 20‑hour large prints, leading to huge variance in material usage and component wear.
I think total print time and tool‑change count might be more suitable metrics.
I agree an was a big surprised we don’t have thids feature yet!
The wiki says some maintenance should be done monthly, but what if the printer is never or rarely used this month, but next month it’s used everyday?
Of course the answer is to schedule maintenance per use hours!
The printer already tracks print hours as well as time per print head!
Can engineering figure out how to add this simple feature to the next firmware release?
It will help make the U1 more user friendly and help to maintain print quality!
Hi, Thanks for the feedback.
The feature scope for V2.2.0 has already been finalized and are now in development, so this may not make it into that release.
I’ve flagged this request to the product team and will follow up on when it can be scheduled.
Best regards.
Thank you. As long as it gets incorporated and not forgotten, it certainly will be useful to users.
This sort of thing has been under discussion since at least March:
https://forum.snapmaker.com/t/wartung-des-u1/41530
https://forum.snapmaker.com/t/how-often-should-i-be-doing-maintenance/43396
Hi Zoe,
Could we have good guidelines in the meantime. A number of tool change, a number of hours in a wiki ? We know that correcting potential bugs in the firmware or snorca is a MUST but maintenance is also an important matter if we want to extend our U1 lenght of service.