Hello all, this is a joint project by: @Mechanikus @MrBean @i3sven and the kind support of the Snapmaker J1 team. Today we present you, our findings and solution against the clogging problem on the J1. In this document you will find everything that leads to the problem and what it takes to so…

Hi @Rwide We apologize for the extended handling time on this after-sales issue. Currently, our new hotend kit (0.4mm) is set to be available on our official online store by the end of February, with individual left/right hotends and high-speed fan accessories planned for release in the coming mont…

Yes, I actually bought a second DX just to see if I had a faulty one. The issue boils down to heat creep/retraction. The device wants to retract too much and wears down the filament causing it to stay in place and clog. Works fine as a single nozzle device. I’d recommend developing something simila…

Hello everyone, I have found another source for Bondtech MK8 Heat Break! [image] 123-3D.co.uk - 3D-printers | kits | parts | filament Cheap 3D printers | filament | 3D accessories ✔ Lowest price guarantee! ✔ Order before 5.30pm, shipped same day ✔ Secure payment ✔ Reliable and fast serv…

Hello everyone, As Snapmaker has now released a Hotend Kit Update , I would like to draw your attention to it. Of course, it will take a while until more accurate results of daily use will be available. Please post the results of the new Hotend-Kit in the section mentioned.

[image] i3sven: Hello everyone, I have found another source for Bondtech MK8 Heat Break! Slice Engineering Copperhead MK8 heatbreak SliceEngineering 123-3d.co.uk Now I wanted to buy some spare heat breaks - but those guys do not ship to outside the UK :frowning:

We have updated the clogging issues and new hotend kit. Check it out: [image] J1/J1s Clogging Issues and New Hotend Kit Update Snapmaker J1 Dear Snapmaker J1/J1s users, In response to valuable customer feedback and to address hotend clogging issues experienced by some use…

In case someone does not like the new hotend due to it not being able to be taken apart by the user (i.e. if the nozzle is broken, it very much seems you have to buy a complete new module!), I have found another european source for the Copperhead MK8 heat break - this one is in Spain: [imag…

The MK8 version seems to have been discontinued by Slice Engineering. Not sure what replaces it. Discontinued notice: https://www.bondtech.se/product/copperhead-mk8-heat-break/ Other options: Copperhead® Bimetallic Heat Break | Slice Engineering

Yes, this is known and indeed unfortunate… and the reason for the posts above that link to sellers that still offer them. We are bound to the MK8-like connection with M6 thread that the J1 heat break has. The only alternative I see so far is the posts from @Viktor above about that Aliexpress MK8 bi…

Has anyone tried these Mk8 heat brakes in light of the discontinuation of the slice engineering copperhead version? <a href="https://www.amazon.com/Heatbreak-Temperature-Bi-Metal-Suitable-Filament/dp/B09WYRY838/ref=mp_s_a_1_1?crid=20E4QMWW4INGH&dib=eyJ2IjoiMSJ9.s4hPNmbh_J9vjxH1I3ye3RRvs2lhieYPCWheegG5BhV_SsaVkgrxHbW6obVyaztKgr-wo4PpRgpW0TFgvYf4ug.mouMubJCq90U_g764S5_7O4Cto-nDxiYRj3P9fAnL5A&dib_tag=se&keywords=mk8+heatbrake&qid=1712257831&sprefix=mk8+heatbrake%2Caps%2C136&sr=8-1" class="onebox" target="_blank" rel="noopener nofollow ugc">https://www.amazon.com/Heatbreak-Temperature-Bi-Metal-Suitable-Filament/dp/B09WYRY838/ref=mp_s_a_1_1?crid=20E4QMWW4INGH&dib=eyJ2IjoiMSJ9.s4hPNmbh_J9vjxH1I3ye3RRvs2lhieYPCWheegG5BhV_Ss…

Findings and solution for the Snapmaker J1 clogging problem

J1/J1s IDEX

Zoe February 23, 2024, 8:40am 267

We have updated the clogging issues and new hotend kit. Check it out:

Topic		Replies	Views
Potential fix for J1 clicking and clogging J1/J1s IDEX	51	6839	June 17, 2024
This device is really beta… J1/J1s IDEX	33	3083	May 4, 2023
Constant extruder skips/clog warnings J1/J1s IDEX	144	8350	January 19, 2025
New Snapmaker J1, 1 month experience and review (cooler mod and speedbench run) J1/J1s IDEX Accessories , 3D_Models	13	1608	May 4, 2024
Snapmaker J1s constant clogged J1/J1s IDEX	34	439	February 18, 2025

Findings and solution for the Snapmaker J1 clogging problem

Related topics