does somebody have experience with replacing the original printbed with a glassbed? I would like to use the autolevel function for the initial leveling. The first print (I leveled manually before) didn’t work. Snapmaker did a autolevelling and on the first point the printhead pushed the glassbed do…

Looks good, what matrix size did you calibrate with? I presume 3x3 should work fine if the material is flat, which glass will be.

DPH_1V2.stl (19.7 KB) DPH_2V2.stl (19.7 KB) Here are the STLs for the corner fixtures.

So far, this is working really nicely! Thanks @Raptor for the brackets. I had to “shave” them down a tad since normally i print the first layer width more than 100% for some “squish” into the standard bed, so there is typically a small lip on them, but just after a bit of that, they fit great with t…

what size glass bed is required for the A350? edit: nevermind, it looks like the 310x310x4mm is the proper size. still waiting to receive my kickstarter

The bed is actually 335 x 365mm

Try your local glass shop that’s where I got mine.

Is 335mm x 365mm the actual bed size or the size of glass needed to use the printed brackets? I’ve found that Fab Glass and Mirror ( http://fabglassandmirror.com ) has good prices and ships with lots of padding (the packing materials far outweighs the glass). I bought a 3/16" thick mirror for my Prom…

335x365 is the actual size of the bed. It is the size I ordered. No idea what size is needed for the printed brackets.

Probably 310x310 mm as this seems to be the size of the Ultrabase platform?!

A350 - printing on glass

Snapmaker 2.0 (3-in-1)

j.m.ratkos September 9, 2020, 12:49am 37

thank you. is there any place that sells a glass bed this size?

Topic		Replies	Views
For all who want level on glass Snapmaker 2.0 (3-in-1)	309	15564	December 8, 2023
Manual Calibration Snapmaker 2.0 (3-in-1)	73	10384	July 24, 2022
Achieving a good first layer A350 Snapmaker 2.0 (3-in-1)	65	10867	January 15, 2022
Is a consistent first layer across whole of A350 build plate actually possible? Snapmaker 2.0 (3-in-1)	37	2565	January 29, 2023
Bed Leveling - Revisited & Detailed Snapmaker 2.0 (3-in-1)	34	9372	July 29, 2024

A350 - printing on glass

Related topics