A nozzle of my printhead got clogged during my second print - is there anywhere a repair manual / instructions how to fix that issue on a dual print head ? Thanks in advance

a350 with all the upgrades and snapmaker enclosure. i received my dual extruder and was impressed with the engineering involved. calibrations went smoothly. i then loaded snapmaker pla’s white and black. I’m using the provided gimbal model in the library. I’m on my 7 try to get a gimbal and every a…

although i can repair. i have had no luck preventing it at this time. i have been playing with standby temp at 100 with no help. i also think i will stop trying to use the gimbal as a test it really appears to be causing some issues with the timing of the nozzles and helping the fail

just had another fail. this one was different. trying another gimbal took the hotend apart as described above. this time the ptfe tube and filament came out with the hotend. stuck. the filament just didn’t pull out at all and the ptfe tube was “loose”. magnifier says that the previous accordion con…

finally there was a mention of using a drill to clear the clog. yes this sort of works. However, in the process the internal ptfe tube gets severely damaged and may or may not work in the future. if you are drilling to clear the nozzle you will still need to detach the nozzle and replace the ptfe t…

Similar to other posts in this thread, my initial reaction on getting the dual extruder was extremely positive, but having had three clogs in the right nozzle and one in the left, and seeing that many others are having this problem, I’m getting more and more disappointed with it. My clogs are just a…

The problem with printing the gimbal could be due to a bug that is preventing the heated bed from heating. See my post in this thread for a simple step that forces the heated bed to warm up: Dual Extruder problems? - #9 by JonnieCache

thanks for the reply. so far in all my servicing of the stuck nozzles. they have all been heat creeped and stuck in the ptfe tube. after servicing and calibrations all of the prints delivered perfect first layers and adhesions… my issue has turned out to maybe be about a fan. somehow i got in my mi…

you know. taping a small piece of paper over each fan exhaust port is an interesting indicator. especially in my case with an orange acrylic enclosure restricting the view

How did you resolve the problem? I suspect a lot of us are seeing this issue…

i haven’t yet. i need a fan replaced. however, i didnt realize the fan was bad. placing a small piece of tape and paper at the top of the exhaust ports helped me visualize what the fans were doing. when fans blow tapes flutter.

A nozzle of my printhead got clogged

Artisan (3-in-1)

wilsonrobertt June 19, 2023, 1:48am 28

there is some action here with printing a new front plate

Topic		Replies	Views
Dual Extrusion Head: Heat creep discussion thread Snapmaker 2.0 (3-in-1)	169	9743	February 26, 2024
Dual Extrusion - filament stuck in nozzel (not clogged) Snapmaker 2.0 (3-in-1) Accessories	18	2067	April 19, 2025
[First Batch Shipped Out] FAQs of Dual Extrusion 3D Printing Module for Snapmaker 2.0 Snapmaker 2.0 (3-in-1)	280	14022	July 19, 2023
Consantly replacing hot ends Snapmaker 2.0 (3-in-1)	77	5517	April 25, 2021
Potential fix for J1 clicking and clogging J1/J1s IDEX	51	6845	June 17, 2024

A nozzle of my printhead got clogged

Related topics