Downloads and Updates for Firmware

Snapmaker Original
10

Mar. 22, 2019: Snapmaker-GD32Base-2.9

Thank you for your suggestions to make the Snapmaker better. Here comes the latest version of the firmware. Your feedback is always appreciated. Please post bug reports and feedback to this topic: Bug Reports and Feedback for Snapmaker-GD32Base-2.X =)

Change Log:

  1. Fixed the bug that some printers fail to upgrade the firmware using the provided USB Disk. If you have run into the USB Disk issue, please format it and make sure its file system is FAT32 before upgrading the firmware.
  2. Fixed the bug that the printer doesn’t follow commands in the jog mode after the print is stopped on the touchscreen.
  3. Fixed the bug that the printer doesn’t lock the slider of the Z axis, which leads to the X axis falling when the printer is not printing.

Download:
Snapmaker-GD32Base-2.9

Note:

  1. Only products that come with the USB Disk can upgrade the firmware.
  2. You can check the About page for the firmware version after the upgrade.
2 Likes