Downloads and Updates for Firmware

Snapmaker Original
7

November 27, 2018: Snapmaker-GD32Base-2.6-beta

Thank you for your suggestions to make the Snapmaker better. Here comes the latest version of the firmware. Your feedback is always appreciated. Please post bug reports and feedback to this topic: Bug Reports and Feedback for Snapmaker-GD32Base-2.X =)

Change Log:

  • added Enclosure Door check (only for laser).
  • bug-fixed for calibration.
  • bug-fixed when stopping a print.
  • bug-fixed for the USB disk read error when the machine is printing.

Download:
Snapmaker-GD32Base-2.6.zip (150.0 KB)

There are 2 options in this update:

  1. basic - works with the V1.0 Enclosure or without an enclosure (without door check function)

  2. Enclosure - works with the V1.1 Enclosure (with door check function)

  • It’s ok to re-upgrade your machine if you use the wrong version. If you choose the Enclosure version but you don’t have the V1.1 enclosure, the 3D printer and CNC carver can still work properly. However, the laser module will not start engraving after you choose a g-code file.

Note:

  1. Only products that come with the USB Disk can upgrade the firmware.
  2. You can check the About page for the firmware version after the upgrade.