# \#Modification

**URL:** https://forum.snapmaker.com/tag/modification/100.md

[Latest](https://forum.snapmaker.com/latest.md) · [Categories](https://forum.snapmaker.com/categories.md) · [Tags](https://forum.snapmaker.com/tags.md)

---

## [Collection thread：U1 Top-Cover Mod](https://forum.snapmaker.com/t/collection-thread-u1-top-cover-mod/40429)

<div class="topic-metadata">

**Author:** [@Simon\_Zhi](https://forum.snapmaker.com/u/Simon_Zhi)\
**Replies:** 52\
**Last updated:** [September 6, 2026, 7:24pm UTC](https://forum.snapmaker.com/t/collection-thread-u1-top-cover-mod/40429 "2026-09-06T19:24:32Z")

</div>

If anyone wants to tap power from the machine for a fan or LED, refer to the specs in this post. Terminal type: MX3.0-6P Max output: 24 V / 0.9 A Pin-out shown below: 【 Pay attention to the safe power limit…

---

## [U1 Top-Cover Mod](https://forum.snapmaker.com/t/u1-top-cover-mod/40421)

<div class="topic-metadata">

**Author:** [@Simon\_Zhi](https://forum.snapmaker.com/u/Simon_Zhi)\
**Replies:** 56\
**Last updated:** [June 29, 2026, 6:38pm UTC](https://forum.snapmaker.com/t/u1-top-cover-mod/40421 "2026-06-29T18:38:35Z")

</div>

Project Introduction: I’m an early-bird U1 owner and didn’t buy the top cover—so I’m going to design my own with acrylic and printed parts. Hoping to come up with something fun. (a.k.a. filling the hole … ) Before…
