# \#Gcode

**URL:** https://forum.snapmaker.com/tag/gcode/4.md?match_all_tags=true&page=3&tags%5B%5D=Gcode

[Latest](https://forum.snapmaker.com/latest.md) · [Categories](https://forum.snapmaker.com/categories.md) · [Tags](https://forum.snapmaker.com/tags.md)

**Page:** 4

---

## [GCODE for extrude then wipe](https://forum.snapmaker.com/t/gcode-for-extrude-then-wipe/31841)

<div class="topic-metadata">

**Author:** [@WELewis](https://forum.snapmaker.com/u/WELewis)\
**Replies:** 1\
**Last updated:** [June 19, 2023, 1:28am UTC](https://forum.snapmaker.com/t/gcode-for-extrude-then-wipe/31841 "2023-06-19T01:28:35Z")

</div>

Started using Orca Slicer for the calibration and intuitive feedback integration with Octopi/Octoprint along with a long list of features that might not make it into Luban for a while. I realized I don’t know enough abou…

---

## [LightBurn software for Artisan](https://forum.snapmaker.com/t/lightburn-software-for-artisan/30403)

<div class="topic-metadata">

**Author:** [@ftoons](https://forum.snapmaker.com/u/ftoons)\
**Replies:** 3\
**Last updated:** [May 8, 2023, 9:32pm UTC](https://forum.snapmaker.com/t/lightburn-software-for-artisan/30403 "2023-05-08T21:32:16Z")

</div>

Hi everyone… The laser module works ok with Luban in my case. I was trying to do some depth map engraving and it seems Luban doesn’t offer that. LightBurn does. Was anyone able to connect it to the Artisan? any issues…

---

## [Problem with A350T and eSun PLA+ filament](https://forum.snapmaker.com/t/problem-with-a350t-and-esun-pla-filament/31095)

<div class="topic-metadata">

**Author:** [@RaephRaeph](https://forum.snapmaker.com/u/RaephRaeph)\
**Replies:** 8\
**Last updated:** [May 8, 2023, 11:50am UTC](https://forum.snapmaker.com/t/problem-with-a350t-and-esun-pla-filament/31095 "2023-05-08T11:50:56Z")

</div>

Hi! I have a weird problem and I really don’t know what I can do to fix it. I want to print a large 3d Model with my Snapmaker 2.0 A350T. I am currently using the eSun PLA+ White Filament as this is the only one I have …

---

## [Laser job won't start](https://forum.snapmaker.com/t/laser-job-wont-start/31197)

<div class="topic-metadata">

**Author:** [@Pinguinus](https://forum.snapmaker.com/u/Pinguinus)\
**Replies:** 6\
**Last updated:** [May 7, 2023, 5:43pm UTC](https://forum.snapmaker.com/t/laser-job-wont-start/31197 "2023-05-07T17:43:15Z")

</div>

The calibration and laser itself seems to work however jobs throw a Failed to Copy error. I’ve tried running the stock Wooden Ruler project that comes standard with Luban and could not for the life of me get it to start…

---

## [Problem with A350T and eSUN PLA+ white filament](https://forum.snapmaker.com/t/problem-with-a350t-and-esun-pla-white-filament/31092)

<div class="topic-metadata">

**Author:** [@RaephRaeph](https://forum.snapmaker.com/u/RaephRaeph)\
**Replies:** 2\
**Last updated:** [May 6, 2023, 11:00am UTC](https://forum.snapmaker.com/t/problem-with-a350t-and-esun-pla-white-filament/31092 "2023-05-06T11:00:26Z")

</div>

Hi! I have a weird problem and I really don’t know what I can do to fix it. I want to print a large 3d Model with my Snapmaker 2.0 A350T. I am currently using the eSun PLA+ White Filament as this is the only one I have …

---

## [Artisan CNC Tool Change G-Code](https://forum.snapmaker.com/t/artisan-cnc-tool-change-g-code/30949)

<div class="topic-metadata">

**Author:** [@GAB](https://forum.snapmaker.com/u/GAB)\
**Replies:** 8\
**Last updated:** [May 3, 2023, 9:11pm UTC](https://forum.snapmaker.com/t/artisan-cnc-tool-change-g-code/30949 "2023-05-03T21:11:23Z")

</div>

Unsatisfied with the cumbersome nature of other people’s tool change workflows, I ventured to fix as much as I could with software. Formally, I’m requesting a list of Gcode commands available in the snapmaker.cps (Marlin…

---

## [CNC Relief Post-Processor in Blender](https://forum.snapmaker.com/t/cnc-relief-post-processor-in-blender/31124)

<div class="topic-metadata">

**Author:** [@Jack4501](https://forum.snapmaker.com/u/Jack4501)\
**Replies:** 0\
**Last updated:** [April 28, 2023, 9:31pm UTC](https://forum.snapmaker.com/t/cnc-relief-post-processor-in-blender/31124 "2023-04-28T21:31:06Z")

</div>

I’ve been trying to a relief carving and have not had success generating good toolpaths in Luban. I started using Blender for the tool paths, generated the gcode, and transfered to the Snapmaker machine, but it shows a r…

---

## [Unable to use commands in luban console](https://forum.snapmaker.com/t/unable-to-use-commands-in-luban-console/31071)

<div class="topic-metadata">

**Author:** [@deluca](https://forum.snapmaker.com/u/deluca)\
**Replies:** 2\
**Last updated:** [April 26, 2023, 4:38am UTC](https://forum.snapmaker.com/t/unable-to-use-commands-in-luban-console/31071 "2023-04-26T04:38:03Z")

</div>

I would like to be able to calibrate my e steps and linear advance , but to do this It requires being able to use the console in the workspace, Unfortunately when I use the supplied USB be cable it appears to connect to …

---

## [File names when sending via WiFi](https://forum.snapmaker.com/t/file-names-when-sending-via-wifi/31047)

<div class="topic-metadata">

**Author:** [@Rayvenhaus](https://forum.snapmaker.com/u/Rayvenhaus)\
**Replies:** 0\
**Last updated:** [April 25, 2023, 5:44am UTC](https://forum.snapmaker.com/t/file-names-when-sending-via-wifi/31047 "2023-04-25T05:44:44Z")

</div>

After renaming a file in Luban Workspace to something that makes sense to what the file will print and then sending it to the printer via WiFi, I end up with a filename on the printer of a random set of numbers. That mak…

---

## [When Luban generating gcode, Is that possible some part of module generate support, and some part not?](https://forum.snapmaker.com/t/when-luban-generating-gcode-is-that-possible-some-part-of-module-generate-support-and-some-part-not/30941)

<div class="topic-metadata">

**Author:** [@RossCHT](https://forum.snapmaker.com/u/RossCHT)\
**Replies:** 3\
**Last updated:** [April 24, 2023, 4:30pm UTC](https://forum.snapmaker.com/t/when-luban-generating-gcode-is-that-possible-some-part-of-module-generate-support-and-some-part-not/30941 "2023-04-24T16:30:43Z")

</div>

As Luban’s gcode preview, it generate 3 parts support to the 3D module, but for some reason I want 2 parts NOT using support, and generate support for last 1 part. Is that possible to do this with Luban ?

---

## [Dual extrusion slicing without manual depth creation](https://forum.snapmaker.com/t/dual-extrusion-slicing-without-manual-depth-creation/30595)

<div class="topic-metadata">

**Author:** [@Spark](https://forum.snapmaker.com/u/Spark)\
**Replies:** 5\
**Last updated:** [March 30, 2023, 7:04am UTC](https://forum.snapmaker.com/t/dual-extrusion-slicing-without-manual-depth-creation/30595 "2023-03-30T07:04:41Z")

</div>

Well, I seem to be at quite a loss. My dual extruder has been getting incrementally better and better with individual calibrations between each filament I own, but I can not figure out how to make intricately detailed du…

---

## [Why would this part cause Luban to fail during slicingh?](https://forum.snapmaker.com/t/why-would-this-part-cause-luban-to-fail-during-slicingh/30558)

<div class="topic-metadata">

**Author:** [@GAB](https://forum.snapmaker.com/u/GAB)\
**Replies:** 0\
**Last updated:** [March 28, 2023, 4:15am UTC](https://forum.snapmaker.com/t/why-would-this-part-cause-luban-to-fail-during-slicingh/30558 "2023-03-28T04:15:42Z")

</div>

In the background of this image, the largest part (Hose Blank Off Plate.stl) is causing Luban to return said error when trying to generate gcode - specifically when trying to generate supports. Loading that STL into i…

---

## [Possible bug: M600 ignored if followed by M109, M106 (manual gcode editing issue)](https://forum.snapmaker.com/t/possible-bug-m600-ignored-if-followed-by-m109-m106-manual-gcode-editing-issue/30340)

<div class="topic-metadata">

**Author:** [@instantiator](https://forum.snapmaker.com/u/instantiator)\
**Replies:** 3\
**Last updated:** [March 20, 2023, 2:19am UTC](https://forum.snapmaker.com/t/possible-bug-m600-ignored-if-followed-by-m109-m106-manual-gcode-editing-issue/30340 "2023-03-20T02:19:25Z")

</div>

I’ve been experimenting with sprinking a few commands into my gcode so I can change the filament during a print. In particular, I’m now adding the M600 command at the end of a layer to initiate a filament change before t…

---

## [Bed temperature not set when printing the Gimbal with dual extruder and a workaround](https://forum.snapmaker.com/t/bed-temperature-not-set-when-printing-the-gimbal-with-dual-extruder-and-a-workaround/30352)

<div class="topic-metadata">

**Author:** [@rgprints](https://forum.snapmaker.com/u/rgprints)\
**Replies:** 0\
**Last updated:** [March 19, 2023, 3:10pm UTC](https://forum.snapmaker.com/t/bed-temperature-not-set-when-printing-the-gimbal-with-dual-extruder-and-a-workaround/30352 "2023-03-19T15:10:11Z")

</div>

When printing the gimbal, the heated bed does not heat because the target temperature is not set in the gcode file. This appeared to be an intermittent problem. I figured out how to fix it! When the gimbal model is loade…

---

## [Luban GCode Question for CNC](https://forum.snapmaker.com/t/luban-gcode-question-for-cnc/30259)

<div class="topic-metadata">

**Author:** [@werosys](https://forum.snapmaker.com/u/werosys)\
**Replies:** 5\
**Last updated:** [March 16, 2023, 8:29am UTC](https://forum.snapmaker.com/t/luban-gcode-question-for-cnc/30259 "2023-03-16T08:29:34Z")

</div>

Hi I try to relief a big model with my Artisan CNC. I created a toolpath with the double flute flat end mill to cut most of the material. Afterwards, I would like to create a toolpath with the V-Bit to cut the details. …

---

## [X/Y nozzle offset calibration and printing](https://forum.snapmaker.com/t/x-y-nozzle-offset-calibration-and-printing/30273)

<div class="topic-metadata">

**Author:** [@TheBum](https://forum.snapmaker.com/u/TheBum)\
**Replies:** 0\
**Last updated:** [March 15, 2023, 9:26pm UTC](https://forum.snapmaker.com/t/x-y-nozzle-offset-calibration-and-printing/30273 "2023-03-15T21:26:01Z")

</div>

Are the x/y nozzle offsets a firmware function? Does the gcode expect separate axes for the two nozzles? I ask because I’m trying to set up a profile in Simplify3D 5.0 and want to be able to use the Artisan’s built-in ca…

---

## [Slow after generating GCode](https://forum.snapmaker.com/t/slow-after-generating-gcode/30067)

<div class="topic-metadata">

**Author:** [@Fenn](https://forum.snapmaker.com/u/Fenn)\
**Replies:** 1\
**Last updated:** [March 7, 2023, 3:25pm UTC](https://forum.snapmaker.com/t/slow-after-generating-gcode/30067 "2023-03-07T15:25:38Z")

</div>

Hey all, trying to do some 3D printing but I am noticing even simple 3D prints are slowing down my whole machine. I am on the most recent version of Luban. Loading in an STL file is fine and I choose normal print with s…

---

## [Gcode on Touchscreen](https://forum.snapmaker.com/t/gcode-on-touchscreen/29880)

<div class="topic-metadata">

**Author:** [@lei](https://forum.snapmaker.com/u/lei)\
**Replies:** 2\
**Last updated:** [February 27, 2023, 8:25pm UTC](https://forum.snapmaker.com/t/gcode-on-touchscreen/29880 "2023-02-27T20:25:15Z")

</div>

Is there any way to get the files from the touchscreen to your computer?

---

## [Control Air Purifier, Lights, and Machine via PrusaSlicer](https://forum.snapmaker.com/t/control-air-purifier-lights-and-machine-via-prusaslicer/29022)

<div class="topic-metadata">

**Author:** [@sightz](https://forum.snapmaker.com/u/sightz)\
**Replies:** 3\
**Last updated:** [January 16, 2023, 10:25pm UTC](https://forum.snapmaker.com/t/control-air-purifier-lights-and-machine-via-prusaslicer/29022 "2023-01-16T22:25:46Z")

</div>

Hi, on Friday I installed my air purifier and was surprised how loud (and strong) it is. Because I’m afraid it would be too loud, I try to search how to switch it on only, when needed. And I don’t want to tinker every …

---

## [Laser cleaning machine, large container for rust removal and cleaning in shipbuilding industry](https://forum.snapmaker.com/t/laser-cleaning-machine-large-container-for-rust-removal-and-cleaning-in-shipbuilding-industry/28924)

<div class="topic-metadata">

**Author:** [@CNCAccTek](https://forum.snapmaker.com/u/CNCAccTek)\
**Replies:** 0\
**Last updated:** [January 11, 2023, 8:20am UTC](https://forum.snapmaker.com/t/laser-cleaning-machine-large-container-for-rust-removal-and-cleaning-in-shipbuilding-industry/28924 "2023-01-11T08:20:51Z")

</div>

Ships are prone to corrosion and aging due to long-term contact with water. Regular cleaning of rust and pollutants on the working surface of ships is an important task of ship production and maintenance. Good ship clean…

---

## [Variable or selectable Parkposition for improved accessibility](https://forum.snapmaker.com/t/variable-or-selectable-parkposition-for-improved-accessibility/28757)

<div class="topic-metadata">

**Author:** [@sightz](https://forum.snapmaker.com/u/sightz)\
**Replies:** 2\
**Last updated:** [January 3, 2023, 5:22pm UTC](https://forum.snapmaker.com/t/variable-or-selectable-parkposition-for-improved-accessibility/28757 "2023-01-03T17:22:02Z")

</div>

Hi, A proposal for a new or modified function. Reaching the Modules through the side door is rather hard, because it parks in the other side. Can you make the Parkposition variable or at least selectable between differ…

---

## [Machine Path Routing Issue](https://forum.snapmaker.com/t/machine-path-routing-issue/28266)

<div class="topic-metadata">

**Author:** [@MyFrogMan](https://forum.snapmaker.com/u/MyFrogMan)\
**Replies:** 0\
**Last updated:** [December 9, 2022, 5:07pm UTC](https://forum.snapmaker.com/t/machine-path-routing-issue/28266 "2022-12-09T17:07:12Z")

</div>

Hello all, I’ve made a few projects with Snapmaker in the past (I have an A350) and I recently thought that the CNC module would be perfect to make a cribbage board. I measured the holes and drew out the design and then…

[Previous page](https://forum.snapmaker.com/tag/gcode/4.md?match_all_tags=true&page=2&tags%5B%5D=Gcode)
