# \#A350

**URL:** https://forum.snapmaker.com/tag/a350/94.md

[Latest](https://forum.snapmaker.com/latest.md) · [Categories](https://forum.snapmaker.com/categories.md) · [Tags](https://forum.snapmaker.com/tags.md)

---

## [Calibration issues](https://forum.snapmaker.com/t/probleme-mit-der-kalibrierung/43610)

<div class="topic-metadata">

**Author:** [@boxenstopdusslingen](https://forum.snapmaker.com/u/boxenstopdusslingen)\
**Replies:** 1\
**Last updated:** [October 12, 2026, 6:19pm UTC](https://forum.snapmaker.com/t/probleme-mit-der-kalibrierung/43610 "2026-10-12T18:19:02Z")

</div>

When I mount and turn on the Dual Exender, it wants to calibrate Calabria. It shuts down completely and aborts the calibration. Is there a way to perform the calibration manually?

---

## [Everything was printing perfectly until it wasn't](https://forum.snapmaker.com/t/everything-was-printing-perfectly-until-it-wasnt/40404)

<div class="topic-metadata">

**Author:** [@chemist](https://forum.snapmaker.com/u/chemist)\
**Replies:** 9\
**Last updated:** [November 27, 2025, 8:46am UTC](https://forum.snapmaker.com/t/everything-was-printing-perfectly-until-it-wasnt/40404 "2025-11-27T08:46:32Z")

</div>

EDIT: it was the nozzle and I’ve been printing mainly eSilk and recently glow-in-the-dark. I did not know that both are hard on nozzles. Can anyone take a look at these images and give me an idea of the cause? Original …

---

## [Any Advice would be nice](https://forum.snapmaker.com/t/any-advice-would-be-nice/40399)

<div class="topic-metadata">

**Author:** [@Corsair\_Pilot](https://forum.snapmaker.com/u/Corsair_Pilot)\
**Replies:** 13\
**Last updated:** [November 19, 2025, 7:22pm UTC](https://forum.snapmaker.com/t/any-advice-would-be-nice/40399 "2025-11-19T19:22:38Z")

</div>

I am currently running a rather long (not sure if it is longer than it needs to be) on the original 50W cnc router that came with the a350. If my little project works, I’d consider maybe the 200W or consider going someth…

---

## [Bad first layer on a350](https://forum.snapmaker.com/t/bad-first-layer-on-a350/40400)

<div class="topic-metadata">

**Author:** [@ineedhelp](https://forum.snapmaker.com/u/ineedhelp)\
**Replies:** 1\
**Last updated:** [November 19, 2025, 3:35am UTC](https://forum.snapmaker.com/t/bad-first-layer-on-a350/40400 "2025-11-19T03:35:55Z")

</div>

I keep printing things hoping the first layer will be better, but it always turns out like this.

---

## [Luban not communicating with A350/unable to update firmware?](https://forum.snapmaker.com/t/luban-not-communicating-with-a350-unable-to-update-firmware/39713)

<div class="topic-metadata">

**Author:** [@fiewce](https://forum.snapmaker.com/u/fiewce)\
**Replies:** 3\
**Last updated:** [July 25, 2025, 11:27am UTC](https://forum.snapmaker.com/t/luban-not-communicating-with-a350-unable-to-update-firmware/39713 "2025-07-25T11:27:03Z")

</div>

I finally figured out my filament issues, only to hit a hard and sudden brick wall. Days after my latest print, whenever I try to export files to my A350 I get an error saying I need to update my firmware. No problem, …

---

## [A350 3D "squishing" layers at same point](https://forum.snapmaker.com/t/a350-3d-squishing-layers-at-same-point/39311)

<div class="topic-metadata">

**Author:** [@CADman\_ks](https://forum.snapmaker.com/u/CADman_ks)\
**Replies:** 8\
**Last updated:** [April 22, 2025, 1:24am UTC](https://forum.snapmaker.com/t/a350-3d-squishing-layers-at-same-point/39311 "2025-04-22T01:24:06Z")

</div>

I have printed with some ABS in the past, but not recently. Had a job that was suited for ABS so put a new roll in. Started print, and about 25mm up it the print had a distinct line, like the filament squished out on t…