# Y Axis Slippage 3D printing **URL:** \ **Category:** Snapmaker 2.0 (3-in-1)\ **Created:** [December 20, 2024, 2:25pm UTC](https://forum.snapmaker.com/t/y-axis-slippage-3d-printing/38491 "2024-12-20T14:25:25Z")\ **Posts on this page:** 1\ **Showing post:** 15
**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\ **Post date:** [December 24, 2024, 7:49pm UTC](https://forum.snapmaker.com/t/y-axis-slippage-3d-printing/38491/15 "2024-12-24T19:49:27Z")
If you need to you could set it back but this comes from your axis or print settings. Here is something to read about a similar issue: > [@Still can't believe all these layer shifts - RESOLVED as Slicing Issue](https://forum.snapmaker.com/t/still-cant-believe-all-these-layer-shifts-resolved-as-slicing-issue/19004): > > I’ve replaced every linear module at least once on my machine. I don’t know what else there is to replace, except for the machine with a different brand at this point. I havent printed much for months due to frusteration, came back with a cool head to try again… within 4 jobs, this starts happening again… I even put these on a small raft, because the ball part had a pretty small flat area and I just wanted to have success ASAP as I wanted the part. Nothing special about the job… Ju… --- _[View the full topic](https://forum.snapmaker.com/t/y-axis-slippage-3d-printing/38491)._