# Y Axis Rattle - Proposed Solution

**URL:** <https://forum.snapmaker.com/t/y-axis-rattle-proposed-solution/12410>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [December 7, 2020, 8:11pm UTC](https://forum.snapmaker.com/t/y-axis-rattle-proposed-solution/12410 "2020-12-07T20:11:49Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![Toxic](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/toxic/32/6974_2.png) [@Toxic](https://forum.snapmaker.com/u/Toxic)\
**Post date:** [December 14, 2020, 2:21pm UTC](https://forum.snapmaker.com/t/y-axis-rattle-proposed-solution/12410/4 "2020-12-14T14:21:58Z")

</div>

Installation takes place. There were still a few changes.

 ![20201214_145749](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/4/4942df9cf75895e752745cfc5a22391edf82f490.jpeg)  
 ![20201214_150103](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/f/fd65b83c33ec0c2822152b64c65d3172a541bac5.jpeg) ![20201214_150130](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/6/66850999461407cd6defceda0afb77666c9b347a.jpeg)

If you have other aluminum profiles, you can adapt the part.  
[Bettstütze-3.FCStd.zip](https://forum.snapmaker.com/uploads/short-url/j4YR7kYwITZjBaiavwNvihBfI2p.zip) (99.5 KB)  
Rename file, cut zip from filename.

 ![20201214_150235](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/d/d335b2dfd86039f7b7294fbaea84d74761dbaff6.jpeg)

and now action

[[2 new photos added to shared album] Snapmaker ![](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/5/50bff7b31746dbdd67cf26d753925327b3694032.jpeg "Snapmaker") ](https://photos.app.goo.gl/pNsDAJ5goDfhJbcSA)

---

_[View the full topic](https://forum.snapmaker.com/t/y-axis-rattle-proposed-solution/12410)._