# Workplace 3d print is a joke

**URL:** <https://forum.snapmaker.com/t/workplace-3d-print-is-a-joke/26043>\
**Category:** Snapmaker Luban\
**Created:** [May 27, 2022, 9:09pm UTC](https://forum.snapmaker.com/t/workplace-3d-print-is-a-joke/26043 "2022-05-27T21:09:34Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lunamaria](https://avatars.discourse-cdn.com/v4/letter/l/d78d45/32.png) [@Lunamaria](https://forum.snapmaker.com/u/Lunamaria)\
**Post date:** [May 27, 2022, 9:09pm UTC](https://forum.snapmaker.com/t/workplace-3d-print-is-a-joke/26043/1 "2022-05-27T21:09:34Z")

</div>

I tried to use the workplace and it’s just boring

I add a model set create a gcode all is good the piece is right in the middle of the bed

then when I switch to the workplace the piece moved to the right top and tell me that the extruder start from the middle of the bed

and the model (for big model) change his scale like ALL the bed in the workplace (334 × 364) is in the top right quarter so divided by 4

if someone has a solution for this ?? I didn’t found one ☹

---

<div class="post-metadata">

**Author:** ![MGarland](https://avatars.discourse-cdn.com/v4/letter/m/e9c0ed/32.png) [@MGarland](https://forum.snapmaker.com/u/MGarland)\
**Post date:** [May 28, 2022, 2:44am UTC](https://forum.snapmaker.com/t/workplace-3d-print-is-a-joke/26043/2 "2022-05-28T02:44:46Z")

</div>

Good Evening,  
I am printing something right now, and when I load the part into Luban it shows it in the center like so:

 ![image](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/5/3/5319569b7a0f5259074e289f05370fb49df4bda9.png)

In the workspace it shows it in the top right quadrant as you have described. I believe that as long as the part you are printing is centered in the quadrant of the workspace you are fine to print.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/1/6/1610b32c71c897e9e1694b0ec88ebb6f0ea3abe9.png)

---

<div class="post-metadata">

**Author:** ![Lunamaria](https://avatars.discourse-cdn.com/v4/letter/l/d78d45/32.png) [@Lunamaria](https://forum.snapmaker.com/u/Lunamaria)\
**Post date:** [May 28, 2022, 8:29am UTC](https://forum.snapmaker.com/t/workplace-3d-print-is-a-joke/26043/3 "2022-05-28T08:29:25Z")

</div>

but not the same scale so I’m not fine to print  
If I set a specific scale Luban has to keep the same scale  
so there is a problem with this function

---

<div class="post-metadata">

**Author:** ![Georg2](https://avatars.discourse-cdn.com/v4/letter/g/e9c0ed/32.png) [@Georg2](https://forum.snapmaker.com/u/Georg2)\
**Post date:** [May 28, 2022, 9:02am UTC](https://forum.snapmaker.com/t/workplace-3d-print-is-a-joke/26043/4 "2022-05-28T09:02:59Z")

</div>

Hello,  
you just have to go to the bottom left corner of your build plate. On the X0 Y0 . Then you set the working origin for x and y. After that you can start the print and everything will be centered.

---

<div class="post-metadata">

**Author:** ![Lunamaria](https://avatars.discourse-cdn.com/v4/letter/l/d78d45/32.png) [@Lunamaria](https://forum.snapmaker.com/u/Lunamaria)\
**Post date:** [May 28, 2022, 9:19am UTC](https://forum.snapmaker.com/t/workplace-3d-print-is-a-joke/26043/5 "2022-05-28T09:19:13Z")

</div>

same joke and nothing changed …

---

<div class="post-metadata">

**Author:** ![Lunamaria](https://avatars.discourse-cdn.com/v4/letter/l/d78d45/32.png) [@Lunamaria](https://forum.snapmaker.com/u/Lunamaria)\
**Post date:** [May 28, 2022, 10:03am UTC](https://forum.snapmaker.com/t/workplace-3d-print-is-a-joke/26043/6 "2022-05-28T10:03:03Z")

</div>

![Desktop 28-05-2022 11-56-22-886](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/6/3/631ee45d624043891ca9f33e01d83ce1dc7e0c0a.png)  
 ![Desktop 28-05-2022 11-59-59-531](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/3/8/38bac1ad278d9d5cf612ff88f907037a98e5ab76.png)  
 ![Desktop 28-05-2022 12-00-47-3](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/4/a/4ab916ec8f95e1336ceb6dbb3038710b1a3f07c9.png)  
 ![Desktop 28-05-2022 12-01-42-410](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/b/e/bed160098203bce5bdc98aa605f658da6a798017.png)

set X/Y to 0

---

<div class="post-metadata">

**Author:** ![Georg2](https://avatars.discourse-cdn.com/v4/letter/g/e9c0ed/32.png) [@Georg2](https://forum.snapmaker.com/u/Georg2)\
**Post date:** [May 28, 2022, 10:43am UTC](https://forum.snapmaker.com/t/workplace-3d-print-is-a-joke/26043/7 "2022-05-28T10:43:49Z")

</div>

Hello,  
sorry I didn’t express myself correctly.  
If you want to print via Luban, press “Go to work origin” on the bottom right. If it is not where you would like it to be, you must use the x + - and y + - buttons on the bottom right to move to your desired position. Then press Set work origin. Then start in Luban. The Snappmaker usually remembers the last work origin.

---

<div class="post-metadata">

**Author:** ![Lunamaria](https://avatars.discourse-cdn.com/v4/letter/l/d78d45/32.png) [@Lunamaria](https://forum.snapmaker.com/u/Lunamaria)\
**Post date:** [May 28, 2022, 10:46am UTC](https://forum.snapmaker.com/t/workplace-3d-print-is-a-joke/26043/8 "2022-05-28T10:46:49Z")

</div>

oh ok ^^ I’ll try so

thanks for your answer
