# Work dimensions
**URL:** https://forum.snapmaker.com/t/work-dimensions/36482
**Category:** Snapmaker 2.0 (3-in-1)
**Created:** [July 28, 2024, 5:49am UTC](https://forum.snapmaker.com/t/work-dimensions/36482 "2024-07-28T05:49:13Z")
**Posts on this page:** 3
**Page:** 1
### Author:  [@Wyphorn](https://forum.snapmaker.com/u/Wyphorn)
#### Post date: [July 28, 2024, 5:49am UTC](https://forum.snapmaker.com/t/work-dimensions/36482/1 "2024-07-28T05:49:13Z")
Hi,
I know somewhere here in forum is an overview which machine had which work dimensions with which accessories (bracing / QS Kit) for every module, but I was not able to find it.
Maybe someone can help me with the link or @Jade or @Zoe can share again.
Thank you
---
### Author:  [@xchrisd](https://forum.snapmaker.com/u/xchrisd)
#### Post date: [July 28, 2024, 12:43pm UTC](https://forum.snapmaker.com/t/work-dimensions/36482/2 "2024-07-28T12:43:41Z")
Here you go:
> **[FAQ for Bracing Kit for Snapmaker 2.0 Linear Modules](https://support.snapmaker.com/hc/en-us/articles/20786910972311-FAQ-for-Bracing-Kit-for-Snapmaker-2-0-Linear-Modules)**
>
> Printer Compatibility
>
> Compatibility: Snapmaker 2.0 A350T/A350/A250T/A250/F350/F250/A150
> Note:
> 1. One set of Bracing Kit contains 5 pieces, yet the A150 printer needs only 3. This results in redun...
---
### Author:  [@Wyphorn](https://forum.snapmaker.com/u/Wyphorn)
#### Post date: [July 28, 2024, 2:14pm UTC](https://forum.snapmaker.com/t/work-dimensions/36482/3 "2024-07-28T14:14:30Z")
Merci @xchrisd