# When printing multiple pieces how does it pocess

**URL:** <https://forum.snapmaker.com/t/when-printing-multiple-pieces-how-does-it-pocess/27613>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [October 20, 2022, 10:15pm UTC](https://forum.snapmaker.com/t/when-printing-multiple-pieces-how-does-it-pocess/27613 "2022-10-20T22:15:25Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Nickkliesen](https://avatars.discourse-cdn.com/v4/letter/n/9d8465/32.png) [@Nickkliesen](https://forum.snapmaker.com/u/Nickkliesen)\
**Post date:** [October 20, 2022, 10:15pm UTC](https://forum.snapmaker.com/t/when-printing-multiple-pieces-how-does-it-pocess/27613/1 "2022-10-20T22:15:25Z")

</div>

with say 4 parts at one time does luban print the whole slice or one part at a time

---

<div class="post-metadata">

**Author:** ![snapUser](https://avatars.discourse-cdn.com/v4/letter/s/e19b73/32.png) [@snapUser](https://forum.snapmaker.com/u/snapUser)\
**Post date:** [October 20, 2022, 10:40pm UTC](https://forum.snapmaker.com/t/when-printing-multiple-pieces-how-does-it-pocess/27613/2 "2022-10-20T22:40:15Z")

</div>

Layer at a time, all parts at once. Not possible any other way, potential collision with other parts.

---

<div class="post-metadata">

**Author:** ![Nickkliesen](https://avatars.discourse-cdn.com/v4/letter/n/9d8465/32.png) [@Nickkliesen](https://forum.snapmaker.com/u/Nickkliesen)\
**Post date:** [October 20, 2022, 11:03pm UTC](https://forum.snapmaker.com/t/when-printing-multiple-pieces-how-does-it-pocess/27613/3 "2022-10-20T23:03:10Z")

</div>

ok that can help me with my part cooling problem thanks