# When cutting multiple shapes only the first shape will cut (40w laser with lightburn)

**URL:** <https://forum.snapmaker.com/t/when-cutting-multiple-shapes-only-the-first-shape-will-cut-40w-laser-with-lightburn/36954>\
**Category:** Artisan (3-in-1)\
**Tags:** Laser\
**Created:** [September 8, 2024, 2:06pm UTC](https://forum.snapmaker.com/t/when-cutting-multiple-shapes-only-the-first-shape-will-cut-40w-laser-with-lightburn/36954 "2024-09-08T14:06:25Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Wyphorn](https://avatars.discourse-cdn.com/v4/letter/w/ebca7d/32.png) [@Wyphorn](https://forum.snapmaker.com/u/Wyphorn)\
**Post date:** [September 8, 2024, 3:01pm UTC](https://forum.snapmaker.com/t/when-cutting-multiple-shapes-only-the-first-shape-will-cut-40w-laser-with-lightburn/36954/2 "2024-09-08T15:01:32Z")

</div>

Hi @Chris2 ,  
have a look for this topic;

> [@Problem with Lightburn and 2.0 with 40W Module](https://forum.snapmaker.com/t/problem-with-lightburn-and-2-0-with-40w-module/34995/3):
>
> When I updated lightburn to 1.5, I could control everything normally with the move controls and even the fire button, but when I hit start, it would just sit there and nothing would happen. I had an install file for 1.4.05 so I put that back on and everything worked with out issue. Something they did when they updated the app messed up the communication. If I get a chance to find a better solution, I will post it, but that was my temporary solution.

Best

---

_[View the full topic](https://forum.snapmaker.com/t/when-cutting-multiple-shapes-only-the-first-shape-will-cut-40w-laser-with-lightburn/36954)._