# Using Luban and the Dual Extruder,can you set it up so you supports print in one color?

**URL:** <https://forum.snapmaker.com/t/using-luban-and-the-dual-extruder-can-you-set-it-up-so-you-supports-print-in-one-color/33713>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [November 20, 2023, 9:54pm UTC](https://forum.snapmaker.com/t/using-luban-and-the-dual-extruder-can-you-set-it-up-so-you-supports-print-in-one-color/33713 "2023-11-20T21:54:21Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Cynexia](https://avatars.discourse-cdn.com/v4/letter/c/ce73a5/32.png) [@Cynexia](https://forum.snapmaker.com/u/Cynexia)\
**Post date:** [November 20, 2023, 9:54pm UTC](https://forum.snapmaker.com/t/using-luban-and-the-dual-extruder-can-you-set-it-up-so-you-supports-print-in-one-color/33713/1 "2023-11-20T21:54:21Z")

</div>

Is there an easy way to set up your project so only the supports will print in one color while your model prints in another?

---

<div class="post-metadata">

**Author:** ![Hauke](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/hauke/32/5704_2.png) [@Hauke](https://forum.snapmaker.com/u/Hauke)\
**Post date:** [November 21, 2023, 1:42pm UTC](https://forum.snapmaker.com/t/using-luban-and-the-dual-extruder-can-you-set-it-up-so-you-supports-print-in-one-color/33713/2 "2023-11-21T13:42:16Z")

</div>

Any Slicer should be able to do this - in the support section of the print settings you should be able to select the extruder that prints the support.

---

<div class="post-metadata">

**Author:** ![Wyphorn](https://avatars.discourse-cdn.com/v4/letter/w/ebca7d/32.png) [@Wyphorn](https://forum.snapmaker.com/u/Wyphorn)\
**Post date:** [November 21, 2023, 3:07pm UTC](https://forum.snapmaker.com/t/using-luban-and-the-dual-extruder-can-you-set-it-up-so-you-supports-print-in-one-color/33713/3 "2023-11-21T15:07:08Z")

</div>

And yes, luban is able to be setup like this.