# Update - Artisan (3-in-1) (Firmware...) **URL:** \ **Category:** Update - Artisan(3-in-1)\ **Created:** [November 15, 2025, 7:47am UTC](https://forum.snapmaker.com/t/update-artisan-3-in-1-firmware/40326 "2025-11-15T07:47:01Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Simon\_Zhi](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/simon_zhi/32/30470_2.png) [@Simon\_Zhi](https://forum.snapmaker.com/u/Simon_Zhi)\ **Post date:** [November 15, 2025, 7:47am UTC](https://forum.snapmaker.com/t/update-artisan-3-in-1-firmware/40326/1 "2025-11-15T07:47:01Z")
Get the latest official updates. Hi community friends This section is for posting Artisan-related updates and user guides, including: user manuals, hardware/software release notes. ---
**Author:** ![Simon\_Zhi](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/simon_zhi/32/30470_2.png) [@Simon\_Zhi](https://forum.snapmaker.com/u/Simon_Zhi)\ **Post date:** [February 16, 2026, 5:08pm UTC](https://forum.snapmaker.com/t/update-artisan-3-in-1-firmware/40326/2 "2026-02-16T17:08:23Z")
【 **Offical version Firmware】** is ready for Artisan, you can download it.you can download it. The official machine firmware will be push before 2026-2-30. **Download** - **EN:[Version：V2.8.0](https://s3.us-west-2.amazonaws.com/snapmaker.com/download/firmware/Artisan_V2.8.0_20260210.bin)** (2026-02-10) - **CN:[Version：V2.8.0](https://snapmaker.oss-cn-beijing.aliyuncs.com/snapmaker.cn/static/support/%E5%9B%BA%E4%BB%B6/Artisan_V2.8.0_20260210.bin)** (2026-02-10) **Changelog-** 1. **Added Direct Machine Connection support for Snapmaker Orca.** You can now send G-code to your machine over Wi-Fi without using Luban as a transfer station. Snapmaker Orca communicates directly with your machine through the OctoPrint protocol. 2. **Added a Repeat Job button on the touchscreen.** After a 3D printing, laser, or CNC job finishes, you’ll see an option to repeat the job and start it again with one tap. - With the beta firmware you no longer need to open Snapmaker Luban first to establish the connection. The only difference from before is the IP-address format, which now becomes: **current device IP:8080** , e.g., **192.168.0.1:8080**. - For detailed steps, please refer to the WIKI：**[Click here to wiki](https://wiki.snapmaker.com/en/Snapmaker_Orca/manual/orca_qsg)** \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_ **Known issues** - When using the single-head dual-nozzle setup for bed-level preheat or XY-offset calibration, uploading & starting a print from Orca will interrupt the calibration. - Uploading & starting a print from both Snapmaker Luban and Snapmaker Orca at the same time will cause the job to fail. - In some cases, sending a file via Snapmaker Orca may stick at 0 % upload progress; if this happens, restart the machine and provide logs plus a description of the problem. - When using the rotary module, the “re-print” function may occasionally restart the job at a different origin. ---
**Author:** ![Simon\_Zhi](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/simon_zhi/32/30470_2.png) [@Simon\_Zhi](https://forum.snapmaker.com/u/Simon_Zhi)\ **Post date:** [March 5, 2026, 8:23am UTC](https://forum.snapmaker.com/t/update-artisan-3-in-1-firmware/40326/3 "2026-03-05T08:23:01Z")
（2026-03-05） # Snapmaker Artisan Firmware **Mar 6 2026: Snapmaker Artisan V2.8.0** ## Changelog ### Touchscreen #### New Features - \*\*Added support for direct network connection between the machine and Snapmaker Orca.\*\*You can now send G-code to your machine over Wi-Fi without using Luban as a transfer station. Snapmaker Orca communicates directly with your machine through the OctoPrint protocol. - **Added a Repeat Job button on the touchscreen.** Once a 3D printing, laser, or CNC job is complete, you can repeat it with a single tap. - For step-by-step instructions, please click **[here](https://wiki.snapmaker.com/en/Snapmaker_Orca/manual/orca_qsg)** to view the related Wiki article. **Known issues** - When preheating the heated bed or performing XY offset calibration using a single-head dual-nozzle, uploading and starting a print via Snapmaker Orca will interrupt the calibration process. - Uploading & starting a print from both Snapmaker Luban and Snapmaker Orca at the same time will cause the job to fail. - In some cases, when sending a file via Snapmaker Orca, the upload progress may remain at 0. If this happens, restart the machine and provide logs plus a description of the problem. - When using the laser module for a reprint, pausing during the downward movement may result in a failure to return to the origin. ## Downloads **[Snapmaker Artisan V2.8.0](https://s3.us-west-2.amazonaws.com/snapmaker.com/download/firmware/Artisan_V2.8.0_20260210.bin)** md5: 7caf49f9b3a5dd0a47448d67e1cf12fe ---
**Author:** ![Simon\_Zhi](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/simon_zhi/32/30470_2.png) [@Simon\_Zhi](https://forum.snapmaker.com/u/Simon_Zhi)\ **Post date:** [March 14, 2026, 9:19am UTC](https://forum.snapmaker.com/t/update-artisan-3-in-1-firmware/40326/4 "2026-03-14T09:19:31Z")