# Unsupported bridges in Prusaslicer? **URL:** \ **Category:** Showcase & Prints\ **Created:** [May 15, 2023, 4:37pm UTC](https://forum.snapmaker.com/t/unsupported-bridges-in-prusaslicer/31382 "2023-05-15T16:37:06Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![Rwide](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/rwide/32/27055_2.png) [@Rwide](https://forum.snapmaker.com/u/Rwide)\ **Post date:** [May 15, 2023, 4:37pm UTC](https://forum.snapmaker.com/t/unsupported-bridges-in-prusaslicer/31382/1 "2023-05-15T16:37:06Z")
Is it possible to print unsupported 90 degree overhangs? I can’t get it to work. For some reason Prusaslicer wants to print all overhangs with cocentric pattern wich makes unsupported 90 degree bridges impossible =( I tried the “don’t support bridges” setting and also changing the infill pattern. Cant find any skin/bottom pattern setting to change either. What am I missing? It can’t really be this bad, can it? ![Snap 2023-05-15 at 18.35.31](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/d/b/dbc15b3b449a028ab5fcafe659ec34cd3b020e85.jpeg) ![Snap 2023-05-15 at 18.35.05](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/d/8/d86e67d0e739467733ecc7f207418a1d3e062aec.jpeg) ![Snap 2023-05-15 at 18.34.03](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/e/c/ecbd88151cf1f728c4437321def1dc12b4aefaf0.jpeg) ![Snap 2023-05-15 at 18.33.24](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/f/3/f3dd65fc13635fc88ff67d0c6fcb6c64f1fff956.png) ---
**Author:** ![Rwide](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/rwide/32/27055_2.png) [@Rwide](https://forum.snapmaker.com/u/Rwide)\ **Post date:** [May 15, 2023, 4:46pm UTC](https://forum.snapmaker.com/t/unsupported-bridges-in-prusaslicer/31382/2 "2023-05-15T16:46:40Z")
Nevermind. I found the solution 😄 There is an experimental setting called “extra perimeters on overhangs”. That one has to be disabled…