# Unable to load or unload filament

**URL:** <https://forum.snapmaker.com/t/unable-to-load-or-unload-filament/31937>\
**Category:** Artisan (3-in-1)\
**Created:** [June 25, 2023, 6:09pm UTC](https://forum.snapmaker.com/t/unable-to-load-or-unload-filament/31937 "2023-06-25T18:09:22Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Firey805](https://avatars.discourse-cdn.com/v4/letter/f/e47774/32.png) [@Firey805](https://forum.snapmaker.com/u/Firey805)\
**Post date:** [June 25, 2023, 6:09pm UTC](https://forum.snapmaker.com/t/unable-to-load-or-unload-filament/31937/1 "2023-06-25T18:09:23Z")

</div>

After loading the black PLA, the white breakaway PLA and running the sample print (Penholder), the console screen does not allow me to unload the filament. Both options are greyed out. What must I do to unload the current filaments from the print module? Thanks in advance for any assistance.

![IMG_2698](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/6/8/68c6d8927af4668ac8a4c910a3e6081e6ff8476f.jpeg)

---

<div class="post-metadata">

**Author:** ![MMoosmann](https://avatars.discourse-cdn.com/v4/letter/m/a87d85/32.png) [@MMoosmann](https://forum.snapmaker.com/u/MMoosmann)\
**Post date:** [June 25, 2023, 6:48pm UTC](https://forum.snapmaker.com/t/unable-to-load-or-unload-filament/31937/2 "2023-06-25T18:48:10Z")

</div>

you have to push the Button “Heat” and wait until the nozzle is Heated before you can load/unload.  
That is not an automatic process 🙂

Greets  
Markus

---

<div class="post-metadata">

**Author:** ![Firey805](https://avatars.discourse-cdn.com/v4/letter/f/e47774/32.png) [@Firey805](https://forum.snapmaker.com/u/Firey805)\
**Post date:** [June 25, 2023, 7:13pm UTC](https://forum.snapmaker.com/t/unable-to-load-or-unload-filament/31937/3 "2023-06-25T19:13:58Z")

</div>

It worked. Thank you so much for the quick response. Moving on to test the laser now. Have a great one!

---

<div class="post-metadata">

**Author:** ![ftoons](https://avatars.discourse-cdn.com/v4/letter/f/6de8d8/32.png) [@ftoons](https://forum.snapmaker.com/u/ftoons)\
**Post date:** [June 25, 2023, 7:43pm UTC](https://forum.snapmaker.com/t/unable-to-load-or-unload-filament/31937/4 "2023-06-25T19:43:41Z")

</div>

I suggest and hope that Snapmaker change this so that unload and load buttons can be pressed once without having to press and wait for the pre heat.  
Just like Prusa

---

<div class="post-metadata">

**Author:** ![joe.issy](https://avatars.discourse-cdn.com/v4/letter/j/8e7dd6/32.png) [@joe.issy](https://forum.snapmaker.com/u/joe.issy)\
**Post date:** [December 10, 2023, 6:09pm UTC](https://forum.snapmaker.com/t/unable-to-load-or-unload-filament/31937/5 "2023-12-10T18:09:04Z")

</div>

As a new Artisan owner, I have the same issue.  
What is the temperature to reach for unloading filament please ?

---

<div class="post-metadata">

**Author:** ![Fishstyx](https://avatars.discourse-cdn.com/v4/letter/f/d78d45/32.png) [@Fishstyx](https://forum.snapmaker.com/u/Fishstyx)\
**Post date:** [December 10, 2023, 6:47pm UTC](https://forum.snapmaker.com/t/unable-to-load-or-unload-filament/31937/6 "2023-12-10T18:47:29Z")

</div>

The temp needs to get within a few degrees of target temp and that temp differs depending on the material defined. For PLA if I recall it targets 200c and the buttons become active around 198.
