# U1 Top-cover Overheating

**URL:** <https://forum.snapmaker.com/t/u1-top-cover-overheating/43253>\
**Category:** U1 Toolchanger\
**Created:** [September 4, 2026, 12:34am UTC](https://forum.snapmaker.com/t/u1-top-cover-overheating/43253 "2026-09-04T00:34:35Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![TheGM](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/thegm/32/30781_2.png) [@TheGM](https://forum.snapmaker.com/u/TheGM)\
**Post date:** [September 4, 2026, 12:34am UTC](https://forum.snapmaker.com/t/u1-top-cover-overheating/43253/1 "2026-09-04T00:34:35Z")

</div>

OK,

So, I am an original U1 Kickstarter supporter. I added the $149 Top-cover during the campaign.

I’m going to just leave the whole 1-year wait for something I wanted from day one alone.

I am also going to leave the sad “Top-cover doesn’t fit” discussion to another already existing thread. I am disappointed about that, but I’ll survive.

I really like my U1. I use it almost every day. I am not a hater.

My issue is that the overall concept of a true Snapmaker U1 integrated environmental solution appears to be a failure.

Please Note that I said environmental. To me, a truly integrated solution is BOTH Cooling and Heating, not just one or the other.

I have had my cover for two weeks now and it is a complete failure in keeping my printer environment COOL enough for PLA printing.

I expected to leave my cover completely enclosed ALL THE TIME.

YES, I live in Florida and it averages 90 degrees F (32 C) during my daytime prints.

Yet, with BOTH fans on, at 100%, within 2-3 hours I am at 44-45 C inside the chamber. I am getting warnings from the U1 itself about the temp being too high for PLA…which is true.

The ‘FIX’? Take off the Top-cover door and open the printer door!

THIS IS THE SAME THING I’VE DONE FOR A YEAR WHILE WAITING ON THIS COVER!!

THIS, to me, is a complete design failure.

(Oh, BTW, I have a Bambu H2S in this same environment, That printer maintains 38-39 C for multiple hour prints.)

VERY disappointing Snapmaker…truly.

---

<div class="post-metadata">

**Author:** ![nikolarun](https://avatars.discourse-cdn.com/v4/letter/n/b9bd4f/32.png) [@nikolarun](https://forum.snapmaker.com/u/nikolarun)\
**Post date:** [September 4, 2026, 12:49am UTC](https://forum.snapmaker.com/t/u1-top-cover-overheating/43253/2 "2026-09-04T00:49:05Z")

</div>

Hi, this is not great. I am still on the Ikea mod, and I have to take it off when printing PLA and PETG. the raiser i have allows to slide it to the back a bit, bit it doesn’t work. I would have thought that the fans on the SM top will take care of that. that is putting me off from buying one, i can mod the Ikea one with a couple of 120/140mm fans , and it will probably do a better job of exhausting the heat.

Similar to the mod for the motherboard and the psu.

Currently printing ABS here are the temps

 ![image](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/2/0/2094ebeb7e88680674b04bcf09c296350fec0a45.png)

---

<div class="post-metadata">

**Author:** ![Zoe\_M](https://avatars.discourse-cdn.com/v4/letter/z/8491ac/32.png) [@Zoe\_M](https://forum.snapmaker.com/u/Zoe_M)\
**Post date:** [September 4, 2026, 4:15am UTC](https://forum.snapmaker.com/t/u1-top-cover-overheating/43253/3 "2026-09-04T04:15:34Z")

</div>

Hi, thank you very much for your feedback.  
Regarding the chamber temperature issue you raised during PLA printing with the Top Cover closed, this is indeed a valid concern that needs to be addressed. We have already escalated this to our engineering team, and they are currently evaluating potential improvements to the temperature control logic.

In the meantime, if you are open to further collaboration with us on testing, please feel free to reach out to our technical support team. If any temporary workarounds or test fixes become available, they will prioritize reaching out to you and assist with the setup.

Sorry for the inconvenience.

Best regards.

---

<div class="post-metadata">

**Author:** ![TheGM](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/thegm/32/30781_2.png) [@TheGM](https://forum.snapmaker.com/u/TheGM)\
**Post date:** [September 4, 2026, 2:56pm UTC](https://forum.snapmaker.com/t/u1-top-cover-overheating/43253/4 "2026-09-04T14:56:27Z")

</div>

Happy to support testing and/or troubleshooting.

What is the best way to proceed with the Technical Team? Do I need to open ticket on this?

Thanks,

Gary M

---

<div class="post-metadata">

**Author:** ![Gramps-Too](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/gramps-too/32/30364_2.png) [@Gramps-Too](https://forum.snapmaker.com/u/Gramps-Too)\
**Post date:** [September 4, 2026, 8:52pm UTC](https://forum.snapmaker.com/t/u1-top-cover-overheating/43253/5 "2026-09-04T20:52:55Z")

</div>

I don’t have a cover. Printing PLA

Room temp 75°

Bed temp 65°

Cavity temp 42c

No top door closed

---

<div class="post-metadata">

**Author:** ![Cylonmode](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/cylonmode/32/30291_2.png) [@Cylonmode](https://forum.snapmaker.com/u/Cylonmode)\
**Post date:** [September 4, 2026, 11:35pm UTC](https://forum.snapmaker.com/t/u1-top-cover-overheating/43253/6 "2026-09-04T23:35:50Z")

</div>

What is your room temperature? The room you have your printer in reaches 90 degrees? Do you keep it in your garage? I live in central Texas where it gets just as hot, if not hotter, and I keep my printer in a room that gets the sun in the afternoon. The average temperature in that room ranges from 80 to 83 degrees. My PLA prints are fine… (With the cover on and door closed)

OP… Try this… Just remove the foam around the base. It fits so much better… And like I said, my printer prints PLA just fine with the fan running at 60%

I also did not use the door foam.

---

<div class="post-metadata">

**Author:** ![TheGM](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/thegm/32/30781_2.png) [@TheGM](https://forum.snapmaker.com/u/TheGM)\
**Post date:** [September 5, 2026, 9:08pm UTC](https://forum.snapmaker.com/t/u1-top-cover-overheating/43253/7 "2026-09-05T21:08:36Z")

</div>

Yes, I print in my garage…for the last 4 years.

Previous Bambu had the door open when printing PLA and internal temp never got over 37-38 C.

H2S is right next to U1 in the garage. It has full chamber monitoring and it keeps temp around 35-37 C. NEVER open the door for PLA through PC and Nylon.

Sure, I can start ripping parts off this $150 Top. But that makes no sense, IMO.

I can just open the door on the U1 and that works too. My comment is just identifying the fact that the U1 Top cover is not properly designed if I have to either 1)take parts off or 2)bypass the cover for some filaments.

GM

---

<div class="post-metadata">

**Author:** ![Cylonmode](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/cylonmode/32/30291_2.png) [@Cylonmode](https://forum.snapmaker.com/u/Cylonmode)\
**Post date:** [September 5, 2026, 10:56pm UTC](https://forum.snapmaker.com/t/u1-top-cover-overheating/43253/8 "2026-09-05T22:56:04Z")

</div>

Are you using the default print profiles? Something seems off, especially if your H2S prints fine… I also have an H2D so I know if the H2S is probably just as good at maintaining its chamber temperatures. I bring it up because the U1 has so much ventilation there should be no reason one should be hotter over the other…

Its obvious the U1 was not originally designed to print things like ASA and ABS, or other engineering grade filaments, and Snapmaker is trying to appease that customer base by over-engineering the U1 top cover.

If you have an H2S and don’t print ABS or ASA on your U1 than what is the point of keeping the foam on there and driving up your chamber temperatures in your hot garage? Principle? Seems like a pointless argument, Snapmaker is not going to do anything about it except maybe give you a $10 dollar refund.

Good luck…

---

<div class="post-metadata">

**Author:** ![TheGM](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/thegm/32/30781_2.png) [@TheGM](https://forum.snapmaker.com/u/TheGM)\
**Post date:** [September 5, 2026, 11:49pm UTC](https://forum.snapmaker.com/t/u1-top-cover-overheating/43253/9 "2026-09-05T23:49:50Z")

</div>

The point is that I am not going to START by modding the new cover. As soon as you do that, you’ve left Snapmaker support being able to do anything.

I am going to give them a chance first to see if they missed something and can provide a fix. I am an engineer myself. If my customer immediately tears up my design, without giving me the opportunity to understand the issue and provide a fix, that really bothers me.

So, I will work with Snapmaker first, as I already have on several other issues with the U1. They have proven to me that they really are trying to make the product better.

---

<div class="post-metadata">

**Author:** ![Cylonmode](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/cylonmode/32/30291_2.png) [@Cylonmode](https://forum.snapmaker.com/u/Cylonmode)\
**Post date:** [September 6, 2026, 12:28am UTC](https://forum.snapmaker.com/t/u1-top-cover-overheating/43253/10 "2026-09-06T00:28:39Z")

</div>

I agree with you, Snapmaker is very transparent about issues and support which is refreshing, however. I doubt they do anything as there is nothing to do, you live in Florida and keep your printer in a hot garage through your own admission.

---

<div class="post-metadata">

**Author:** ![TheGM](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/thegm/32/30781_2.png) [@TheGM](https://forum.snapmaker.com/u/TheGM)\
**Post date:** [September 6, 2026, 12:56am UTC](https://forum.snapmaker.com/t/u1-top-cover-overheating/43253/11 "2026-09-06T00:56:56Z")

</div>

Respectfully, you are missing the point entirely.  
In this same garage, I have been printing on this same U1 all summer long just fine. I did the IKEA cover mod and it has worked fine as long as I keep the door open which makes sense as it has zero ventilation. Temps stay between 37-39 C even on a 48 hour print.  
Adding a ventilated cover specifically designed for the U1 should NOT add 10+ C to the chamber temperature.  
This is a thermal design issue, and there are definitely ways to fix this.

---

<div class="post-metadata">

**Author:** ![BugBuster](https://avatars.discourse-cdn.com/v4/letter/b/85f322/32.png) [@BugBuster](https://forum.snapmaker.com/u/BugBuster)\
**Post date:** [September 6, 2026, 2:33pm UTC](https://forum.snapmaker.com/t/u1-top-cover-overheating/43253/12 "2026-09-06T14:33:01Z")

</div>

I’m having the same issue except; I’m not in a garage but in a room that can get up to 80 deg during the day. My prints were perfect with the IKEA cover mod, but since adding the Top Cover, very few prints succeed.

Thanks

---

<div class="post-metadata">

**Author:** ![Cylonmode](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/cylonmode/32/30291_2.png) [@Cylonmode](https://forum.snapmaker.com/u/Cylonmode)\
**Post date:** [September 6, 2026, 4:04pm UTC](https://forum.snapmaker.com/t/u1-top-cover-overheating/43253/13 "2026-09-06T16:04:37Z")

</div>

> [@TheGM](#):
>
> Respectfully, you are missing the point entirely.

I really am not. Was your IKEA cover meant to retain heat? The top cover is… To a degree. Like you said, its a thermal design issue. What is your opinion on how to fix it?

Look at this new Modbot video… He has the beta version with the thinner foam.

[![](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/6/0/60108d9d10828c1798ba90f47a2c1af4ee9e432a.jpeg "Pushing The Snapmaker U1 Even Further") ](https://www.youtube.com/watch?v=MLTifrRX9j8)

> [@BugBuster](#):
>
> I’m not in a garage but in a room that can get up to 80 deg during the day.

I am also in a room with consistent temperatures of 80+ degrees and I have zero problems. Seems removing the bottom foam was a fix that has worked for “me” in more ways than one. My cover fits better, I didn’t have to print anything extra, and PLA/PETG has no issues in my warmer environment.

---

<div class="post-metadata">

**Author:** ![Zoe\_M](https://avatars.discourse-cdn.com/v4/letter/z/8491ac/32.png) [@Zoe\_M](https://forum.snapmaker.com/u/Zoe_M)\
**Post date:** [September 7, 2026, 2:49am UTC](https://forum.snapmaker.com/t/u1-top-cover-overheating/43253/14 "2026-09-07T02:49:52Z")

</div>

> [@BugBuster](#):
>
> 80 deg

@TheGM

Sorry for the inconvenience. You can refer to this link to submit the tickt and leave me a message with the ticket ID：[https://snapmaker.formcrafts.com/u1-troubleshooting-request](https://snapmaker.formcrafts.com/u1-troubleshooting-request)

@BugBuster

Can you also help me submit a support ticket and provide me with the ticket ID?  
When you send the email, please try to include the following details:

- What are your most frequently used filament types?
- Have you also been encountering high-temperature warnings frequently?
- Could you include some photos of the failed prints?

Best regards.

---

<div class="post-metadata">

**Author:** ![Zoe\_M](https://avatars.discourse-cdn.com/v4/letter/z/8491ac/32.png) [@Zoe\_M](https://forum.snapmaker.com/u/Zoe_M)\
**Post date:** [September 7, 2026, 3:06am UTC](https://forum.snapmaker.com/t/u1-top-cover-overheating/43253/15 "2026-09-07T03:06:33Z")

</div>

Thanks for sharing the video with us.  
Previously, I was mainly informed that the thicker foam is intended to improve sealing. I hadn’t considered that it might also add extra insulation, which might benefit ASA/ABS printing in some ways but affect general PLA printing.  
I’ve forwarded this concern to the engineers and am currently awaiting their confirmation.

---

<div class="post-metadata">

**Author:** ![Cylonmode](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/cylonmode/32/30291_2.png) [@Cylonmode](https://forum.snapmaker.com/u/Cylonmode)\
**Post date:** [September 7, 2026, 3:15am UTC](https://forum.snapmaker.com/t/u1-top-cover-overheating/43253/16 "2026-09-07T03:15:42Z")

</div>

Snapmaker is lucky to have you @Zoe_M, you’re a great representative. I think we can all agree they should have just left the thinner foam that went out to all the beta-testers and influencers.

---

<div class="post-metadata">

**Author:** ![TheGM](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/thegm/32/30781_2.png) [@TheGM](https://forum.snapmaker.com/u/TheGM)\
**Post date:** [September 7, 2026, 1:59pm UTC](https://forum.snapmaker.com/t/u1-top-cover-overheating/43253/17 "2026-09-07T13:59:44Z")

</div>

First, I totally agree that Zoe is a fabulous customer advocate and I really appreciate her support.

Now, about Daniel’s YT video. Know him well, and his stuff is always well done.

However if you actually listen to what he said and look at the text overlay at the end of this video, he didnt even test the Top Cover using fans…at all! He admitted he would need to do that in future testing. As several other beta testers pointed out, you cannot get the full chamber heating effect without using at least the recirculation fan. The other testers also found that for best heat retention, the insulation was NOT thick enough. I’m pretty sure this is why Snapmaker added to it for Production.

So, before we completely re-design the cover, perhaps allow Snapmaker a chance to look at this in light of new data. I’ve waited this long, I can wait a bit longer.

Personally, I think I should be able to leave this cover on at all times, whether I’m printing PLA or PC-CF.

---

<div class="post-metadata">

**Author:** ![BugBuster](https://avatars.discourse-cdn.com/v4/letter/b/85f322/32.png) [@BugBuster](https://forum.snapmaker.com/u/BugBuster)\
**Post date:** [September 7, 2026, 2:04pm UTC](https://forum.snapmaker.com/t/u1-top-cover-overheating/43253/18 "2026-09-07T14:04:40Z")

</div>

Hi Zoe, I submitted Ticket #653831

For everyone else, here is my note in the ticket:

After installing the Top Cap on my Snapmaker U1, all prints using **FlashForge PETG HS** and **Overture TPU 95A** have begun failing whenever the print exceeds approximately **5 mm in height**. This occurs on both a **smooth PEI plate** and a **textured cool plate**. No filament settings were changed from the successful prints completed prior to installing the Top Cap.

I recalibrated after the initial failures. With TPU, I was eventually able to complete a tall print (over 100 mm). However, PETG HS consistently fails under the same conditions.

In all failed cases, **the front door and top cap were closed**.

When I repeated the PETG HS print **with the door left open** , the part printed successfully without any changes to the slicer profile.

I have not received any warnings about high temperatures.

I’ve attached photos of the failed prints:

- **Black TPU 95A print:** The print was perfect until roughly one‑third height, where it began producing “spaghetti” extrusion and lifted from the build plate. Before installing the Top Cap, I used an IKEA container as a makeshift enclosure, and this same TPU print completed successfully with identical settings and the same build plate.

- **Red FlashForge PETG HS print:** This print failed with the Top Cap installed and the door closed, despite using the same settings that previously worked. Without changing anything, I opened the front door and reprinted the part successfully.

Based on these observations, the failures appear to be related to enclosure airflow or temperature behavior introduced after installing the Top Cap.

---

<div class="post-metadata">

**Author:** ![Cylonmode](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/cylonmode/32/30291_2.png) [@Cylonmode](https://forum.snapmaker.com/u/Cylonmode)\
**Post date:** [September 7, 2026, 4:49pm UTC](https://forum.snapmaker.com/t/u1-top-cover-overheating/43253/19 "2026-09-07T16:49:27Z")

</div>

> [@TheGM](#):
>
> The other testers also found that for best heat retention, the insulation was NOT thick enough. I’m pretty sure this is why Snapmaker added to it for Production.

@Zoe_M mentioned in the other thread that the thicker foam was added for sealing purposes and not necessarily for heat retention. From my POV the Modbot video was a demonstration of how to retain heat further in which he states that adding just the top cover does very little for that purpose. So regardless of why the foam was thickened, it seems rather pointless and resulted in the fitment problem and for the heat problem you and @BugBuster have for PLA/PETG

My point here for you is, if the top cover alone is not retaining that much more heat, but it ruins your PLA/PETG prints, then we have a bigger problem.

I found my solution and I hope you find yours, and that you don’t have to wait another 6 months…

---

<div class="post-metadata">

**Author:** ![TheGM](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/thegm/32/30781_2.png) [@TheGM](https://forum.snapmaker.com/u/TheGM)\
**Post date:** [September 7, 2026, 5:01pm UTC](https://forum.snapmaker.com/t/u1-top-cover-overheating/43253/20 "2026-09-07T17:01:42Z")

</div>

@BugBuster Hmm, so your issue as described seems different than this Topic, which is specifically Overheating of the chamber with the Top Cover installed in hot climate. I have not seen what you are describing at all. My prints are fine, except when the temperature reaches around 48-50 C, at which point the U1 stops printing and gives a warning about potential clogging of the PLA at these temps.

So, does your issue need to be a separate thread? Just asking, so your issue isn’t ‘lost’ in this thread.

[Next page](https://forum.snapmaker.com/t/u1-top-cover-overheating/43253.md?page=2)
