Trying to level my bed without the touchscreen and more issues

[Riskey]

You could try the solution in these threads and see if they works for you:

Touchscreen failure, need to level bed to use luban

You can use the Console and Control panel on Luban to level your heated bed (5×5 Auto Mode) by the following steps: Connect the machine with Luban via the USB cable. On the Console panel, enter G1029 P5. Enter G1029 A. The auto-leveling process will start. After the leveling process ends and the toolhead stops moving, adjust the height of the toolhead with the Z+ and Z- buttons on the Control panel and calibrate the Z offset with the provided calibration card or a piece of A4 paper (as instruc…

Calibrating with the console without a display

Just posting it here for someone to download. This is the way to auto calibrate via the console if your display is broken. Auto Calibration with more points.docx (795.2 KB)