# Try this if your prints are messing up

**URL:** <https://forum.snapmaker.com/t/try-this-if-your-prints-are-messing-up/12407>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [December 7, 2020, 6:55pm UTC](https://forum.snapmaker.com/t/try-this-if-your-prints-are-messing-up/12407 "2020-12-07T18:55:00Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Technoteacher](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/technoteacher/32/4171_2.png) [@Technoteacher](https://forum.snapmaker.com/u/Technoteacher)\
**Post date:** [December 7, 2020, 6:55pm UTC](https://forum.snapmaker.com/t/try-this-if-your-prints-are-messing-up/12407/1 "2020-12-07T18:55:00Z")

</div>

I accidentally used the hex screws in the heated plate and ran into messed up prints. I should have used the flat head screws!