# Temp Tower Gcode

**URL:** <https://forum.snapmaker.com/t/temp-tower-gcode/18877>\
**Category:** Snapmaker Luban\
**Created:** [May 24, 2021, 1:31am UTC](https://forum.snapmaker.com/t/temp-tower-gcode/18877 "2021-05-24T01:31:03Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![sdj544](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/sdj544/32/11365_2.png) [@sdj544](https://forum.snapmaker.com/u/sdj544)\
**Post date:** [May 24, 2021, 5:45am UTC](https://forum.snapmaker.com/t/temp-tower-gcode/18877/3 "2021-05-24T05:45:52Z")

</div>

Also some here:

> [@Issues printing with certain color PLA filament](https://forum.snapmaker.com/t/issues-printing-with-certain-color-pla-filament/15376/9):
>
> try even more heat i guess some of the filled filaments do better with wider nozzles, i dont know if that applies to marble though. i say find a temp tower that starts hot and works its way to cold, maybe a 250 i can share one that starts at 240, but thats not much better than where you were [Heat\_tower\_190-240\_Bridge.gcode](https://forum.snapmaker.com/uploads/short-url/aG7fev33lfdWFAjpwDeJ3gx6Pcu.gcode) (2.0 MB)

Are you trying to run from luban or are you transferring the gcode to the SM and running from there?  
-S

---

_[View the full topic](https://forum.snapmaker.com/t/temp-tower-gcode/18877)._