# SVG image to engrave without edge **URL:** \ **Category:** Snapmaker2.0 Troubleshooting guides\ **Created:** [May 14, 2021, 4:46pm UTC](https://forum.snapmaker.com/t/svg-image-to-engrave-without-edge/18670 "2021-05-14T16:46:43Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![sdj544](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/sdj544/32/11365_2.png) [@sdj544](https://forum.snapmaker.com/u/sdj544)\ **Post date:** [May 14, 2021, 5:03pm UTC](https://forum.snapmaker.com/t/svg-image-to-engrave-without-edge/18670/2 "2021-05-14T17:03:24Z")
Welcome to the forum. This question has just been asked: > [@SVG files in Luban don't give me VECTOR option](https://forum.snapmaker.com/t/svg-files-in-luban-dont-give-me-vector-option/18633): > > I’m sure this is the wrong channel for these questions but it’s LUBAN who has shown me my mistakes and I’m wondering if anyone can help me. I used Inkscape to convert a jpg into a SVG. I watched YouTube videos and I followed them to the T. When I import the newly created SVG file into Luban this is what I see in the EDIT screen: First question - It looks good except Luban doesn’t allow me to choose “Process Mode” options such as relief or vector or I give me the… also: > [@Image border on laser?](https://forum.snapmaker.com/t/image-border-on-laser/15216): > > When attempting to engrave a simple design on wood, the laser appears to do fine with the design, but then engraves an additional “box” around the border, which does not exist in the image. Being familiar with vinyl cutters, this would have been a setting in the processing of the image that could be turned off. However, I have been unable to find such in the Snapmaker software. (file attached). suggestions appreciated. [Vegvisir] -S --- _[View the full topic](https://forum.snapmaker.com/t/svg-image-to-engrave-without-edge/18670)._