# Stepping Down on an Angle When Using CNC

**URL:** <https://forum.snapmaker.com/t/stepping-down-on-an-angle-when-using-cnc/28983>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [January 14, 2023, 2:36am UTC](https://forum.snapmaker.com/t/stepping-down-on-an-angle-when-using-cnc/28983 "2023-01-14T02:36:34Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bourassa002](https://avatars.discourse-cdn.com/v4/letter/b/7ba0ec/32.png) [@Bourassa002](https://forum.snapmaker.com/u/Bourassa002)\
**Post date:** [January 14, 2023, 2:36am UTC](https://forum.snapmaker.com/t/stepping-down-on-an-angle-when-using-cnc/28983/1 "2023-01-14T02:36:34Z")

</div>

Is there a way to make the CNC module step down on an angle (ie. moving in the X or Y plane as the tool head moves down in the z direction)?

Any help would be appreciated, thanks.

---

<div class="post-metadata">

**Author:** ![snapUser](https://avatars.discourse-cdn.com/v4/letter/s/e19b73/32.png) [@snapUser](https://forum.snapmaker.com/u/snapUser)\
**Post date:** [January 14, 2023, 5:00am UTC](https://forum.snapmaker.com/t/stepping-down-on-an-angle-when-using-cnc/28983/2 "2023-01-14T05:00:17Z")

</div>

Yes, that is possible via gcode.

---

<div class="post-metadata">

**Author:** ![Bourassa002](https://avatars.discourse-cdn.com/v4/letter/b/7ba0ec/32.png) [@Bourassa002](https://forum.snapmaker.com/u/Bourassa002)\
**Post date:** [January 14, 2023, 9:04pm UTC](https://forum.snapmaker.com/t/stepping-down-on-an-angle-when-using-cnc/28983/3 "2023-01-14T21:04:26Z")

</div>

How would you go about coding the ramp down?