# 3D Printing - Temperature at 0 **URL:** \ **Category:** Original (3-in-1)\ **Created:** [March 9, 2026, 3:58pm UTC](https://forum.snapmaker.com/t/stampa-3d-temperatura-a-0/41419 "2026-03-09T15:58:31Z")\ **Posts on this page:** 1\ **Showing post:** 10
**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\ **Post date:** [March 12, 2026, 7:29pm UTC](https://forum.snapmaker.com/t/stampa-3d-temperatura-a-0/41419/10 "2026-03-12T19:29:33Z")
> [@carla](#): > > Target Temp 200°C and Current Temp rises up to the same temperatur In this case, I think your gcode or usb stick is corrupt. Let’s try this gcode: [https://forum.snapmaker.com/uploads/short-url/jsByiW8sNAd6wIrjQMSsoKjxVT0.gcode](https://forum.snapmaker.com/uploads/short-url/jsByiW8sNAd6wIrjQMSsoKjxVT0.gcode) It’s from this thread in the test section: > [@3d Print Guide\_Walk Through](https://forum.snapmaker.com/t/3d-print-guide-walk-through/5945): > > First of all, congratulations to a great machine! If you have any suggestions to this topic, feel free to send me a PM! You are new to 3d printing?- Be patient. The whole thing is very complex and just little adjustments will make the difference from failed to pretty prints. Start with easy, little things to create (1-3hours i would suggest) . Going to print the first time and then getting a 24h print on, maybe failes. There is a lot to learn, if it didn´t work for a long time, cool off a bi… --- _[View the full topic](https://forum.snapmaker.com/t/stampa-3d-temperatura-a-0/41419)._