# Sneak Peek: Artisan PEI Magnetic Sheet is Coming Soon! (optional accessory)

**URL:** <https://forum.snapmaker.com/t/sneak-peek-artisan-pei-magnetic-sheet-is-coming-soon-optional-accessory/36514>\
**Category:** Artisan (3-in-1)\
**Created:** [July 31, 2024, 10:24am UTC](https://forum.snapmaker.com/t/sneak-peek-artisan-pei-magnetic-sheet-is-coming-soon-optional-accessory/36514 "2024-07-31T10:24:25Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Zoe](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/zoe/32/26962_2.png) [@Zoe](https://forum.snapmaker.com/u/Zoe)\
**Post date:** [July 31, 2024, 10:24am UTC](https://forum.snapmaker.com/t/sneak-peek-artisan-pei-magnetic-sheet-is-coming-soon-optional-accessory/36514/1 "2024-07-31T10:24:25Z")

</div>

We’ve noticed that many users have recently shared their bed modification experiences. Now, we’re excited to introduce our official Artisan PEI Magnetic Sheet! If you’re planning a modification, stay tuned for our release!

 ![img_v3_02da_917f872c-7c9e-4b80-a736-c4a132d77c5g](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/e/3/e3320e2379b136501a3bfa5c725453148ce11c01.jpeg)

---

<div class="post-metadata">

**Author:** ![TheBum](https://avatars.discourse-cdn.com/v4/letter/t/eada6e/32.png) [@TheBum](https://forum.snapmaker.com/u/TheBum)\
**Post date:** [August 2, 2024, 4:12am UTC](https://forum.snapmaker.com/t/sneak-peek-artisan-pei-magnetic-sheet-is-coming-soon-optional-accessory/36514/2 "2024-08-02T04:12:45Z")

</div>

That might just get me to use a PEI surface again. I’ve always had adhesion issues with PEI before, so I switched to glass and glue stick for more consistent results. However, with a magnetic sheet, it would be much easier to pop prints off the surface.

---

<div class="post-metadata">

**Author:** ![Skreelink](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/skreelink/32/16398_2.png) [@Skreelink](https://forum.snapmaker.com/u/Skreelink)\
**Post date:** [August 2, 2024, 6:54pm UTC](https://forum.snapmaker.com/t/sneak-peek-artisan-pei-magnetic-sheet-is-coming-soon-optional-accessory/36514/3 "2024-08-02T18:54:21Z")

</div>

That’s good to hear. 🙂 One of the first things I did when I got my 2.0 was to get a double sided PEI sheet, smooth on one side, textured on the other. Is this one the same or just textured?

---

<div class="post-metadata">

**Author:** ![Zoe](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/zoe/32/26962_2.png) [@Zoe](https://forum.snapmaker.com/u/Zoe)\
**Post date:** [August 6, 2024, 9:11am UTC](https://forum.snapmaker.com/t/sneak-peek-artisan-pei-magnetic-sheet-is-coming-soon-optional-accessory/36514/4 "2024-08-06T09:11:42Z")

</div>

We will offer two types of most frequently used sheets in the beginning (textured and smooth).

---

<div class="post-metadata">

**Author:** ![TheBum](https://avatars.discourse-cdn.com/v4/letter/t/eada6e/32.png) [@TheBum](https://forum.snapmaker.com/u/TheBum)\
**Post date:** [August 6, 2024, 8:27pm UTC](https://forum.snapmaker.com/t/sneak-peek-artisan-pei-magnetic-sheet-is-coming-soon-optional-accessory/36514/5 "2024-08-06T20:27:24Z")

</div>

Good to know. I’ll likely use smooth 99% of the time.