# Snapmaker's belt cover has snapped

**URL:** <https://forum.snapmaker.com/t/snapmakers-belt-cover-has-snapped/27715>\
**Category:** Showcase & Prints\
**Created:** [October 30, 2022, 11:44am UTC](https://forum.snapmaker.com/t/snapmakers-belt-cover-has-snapped/27715 "2022-10-30T11:44:49Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![brvdboss](https://avatars.discourse-cdn.com/v4/letter/b/9f8e36/32.png) [@brvdboss](https://forum.snapmaker.com/u/brvdboss)\
**Post date:** [November 2, 2022, 7:55am UTC](https://forum.snapmaker.com/t/snapmakers-belt-cover-has-snapped/27715/5 "2022-11-02T07:55:27Z")

</div>

Or you can also try to fix it yourself by making a plastic cover :

> [@Tightening the linear module metal cover](https://forum.snapmaker.com/t/tightening-the-linear-module-metal-cover/20663/6):
>
> Hi wasn’t sure where to put this, but I have recently had a similar problem. I stuffed one of the metal covers. Apparently can not buy as a parts, I find this a little odd. Any way looked at options and made my own. Used clear plastic laminating sheets, place two together inside each other and laminated in normal machine. The two gives a total of 4 thicknesses and add strength. cut to 5/8 wide and longer than the metal strips by about 50mm. Punched holes to suit clamps and installed in usual…

---

_[View the full topic](https://forum.snapmaker.com/t/snapmakers-belt-cover-has-snapped/27715)._
