# Snapmaker U1 Orca Slicer preview & printing not using support filaments as set

**URL:** <https://forum.snapmaker.com/t/snapmaker-u1-orca-slicer-preview-printing-not-using-support-filaments-as-set/43786>\
**Category:** Snapmaker Orca\
**Created:** [October 26, 2026, 2:59pm UTC](https://forum.snapmaker.com/t/snapmaker-u1-orca-slicer-preview-printing-not-using-support-filaments-as-set/43786 "2026-10-26T14:59:48Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![SGOne](https://avatars.discourse-cdn.com/v4/letter/s/a9adbd/32.png) [@SGOne](https://forum.snapmaker.com/u/SGOne)\
**Post date:** [October 26, 2026, 2:59pm UTC](https://forum.snapmaker.com/t/snapmaker-u1-orca-slicer-preview-printing-not-using-support-filaments-as-set/43786/1 "2026-10-26T14:59:48Z")

</div>

I am using the latest Snapmaker Orca slicer, 2.4.0, and set up PLA for toolhead1 and PVA for toolhead2. I set PVA for the support interface only and Default for the base. The preview shows PVA being used for the entire support and printing the model is using PVA for the entire support. What am I missing?

 ![image](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/a/e/ae5332b301d65ab5620bfd7bd7212241b3aa9d2e.jpeg)

 ![image](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/4/1/41e935fed586405c5a058c5ab43b432b7d24e774.jpeg)

---

<div class="post-metadata">

**Author:** ![Zoe\_M](https://avatars.discourse-cdn.com/v4/letter/z/8491ac/32.png) [@Zoe\_M](https://forum.snapmaker.com/u/Zoe_M)\
**Post date:** [October 27, 2026, 3:24am UTC](https://forum.snapmaker.com/t/snapmaker-u1-orca-slicer-preview-printing-not-using-support-filaments-as-set/43786/2 "2026-10-27T03:24:55Z")

</div>

@SGOne

Hi, can you also share me the .3mf file?

(The forum didn’t allow uploading the 3mf file format directly.You could try to upload a zip folder or cloud drive link)

It is also suggested to test whether the 2.4.1 beta version helps:

> [@Snapmaker Orca V2.4.1 Beta Release](https://forum.snapmaker.com/t/snapmaker-orca-v2-4-1-beta-release/43745):
>
> Hi everyone, Snapmaker Orca V2.4.1 BetaTest is ready for testers. This Beta build adds uninstall cache control for Windows, prime tower toolpath improvements, new support & multi-filament validation warnings, plus new acceleration/jerk and paint penetration parameters. Download Link & Release Notes: [Release Snapmaker Orca V2.4.1-Beta-Release · Snapmaker/OrcaSlicer · GitHub](https://github.com/Snapmaker/OrcaSlicer/releases/tag/v2.4.1-beta)play_button New Featuresplay_button Improvementsplay_button Bug Fixes If you are interested in this build, feel free to join the discussion and leave y…

Wait for your reply.

Best regards.

---

<div class="post-metadata">

**Author:** ![SGOne](https://avatars.discourse-cdn.com/v4/letter/s/a9adbd/32.png) [@SGOne](https://forum.snapmaker.com/u/SGOne)\
**Post date:** [October 27, 2026, 1:06pm UTC](https://forum.snapmaker.com/t/snapmaker-u1-orca-slicer-preview-printing-not-using-support-filaments-as-set/43786/3 "2026-10-27T13:06:24Z")

</div>

Here’s the 3mf file I used.

[trio\_Eris-Roxy-Sylphi.zip](https://forum.snapmaker.com/uploads/short-url/mtDbfXZPWoB4ehz3BGQj3FYKQY9.zip) (8.0 MB)

---

<div class="post-metadata">

**Author:** ![Zoe\_M](https://avatars.discourse-cdn.com/v4/letter/z/8491ac/32.png) [@Zoe\_M](https://forum.snapmaker.com/u/Zoe_M)\
**Post date:** [October 28, 2026, 4:27am UTC](https://forum.snapmaker.com/t/snapmaker-u1-orca-slicer-preview-printing-not-using-support-filaments-as-set/43786/4 "2026-10-28T04:27:38Z")

</div>

Hi, please refer to

> [@Snapmaker Orca V2.4.1 Beta Release](https://forum.snapmaker.com/t/snapmaker-orca-v2-4-1-beta-release/43745/3):
>
> @SGOne Hi, the engineer helped me check the .3mf file. Support settings for the Object override Global settings. The default support settings of your .3mf file under Objectare setting both Support Base and Interface as PVA.

Best regards.

---

<div class="post-metadata">

**Author:** ![SGOne](https://avatars.discourse-cdn.com/v4/letter/s/a9adbd/32.png) [@SGOne](https://forum.snapmaker.com/u/SGOne)\
**Post date:** [October 28, 2026, 12:06pm UTC](https://forum.snapmaker.com/t/snapmaker-u1-orca-slicer-preview-printing-not-using-support-filaments-as-set/43786/5 "2026-10-28T12:06:09Z")

</div>

When I click on Objects, I don’t get the Support tab so I can’t set anything different from Global.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/9/a/9a6b50ce3bc0fd369b2b8f7d9763c91b870ee322.jpeg)

---

<div class="post-metadata">

**Author:** ![SGOne](https://avatars.discourse-cdn.com/v4/letter/s/a9adbd/32.png) [@SGOne](https://forum.snapmaker.com/u/SGOne)\
**Post date:** [October 28, 2026, 1:38pm UTC](https://forum.snapmaker.com/t/snapmaker-u1-orca-slicer-preview-printing-not-using-support-filaments-as-set/43786/6 "2026-10-28T13:38:37Z")

</div>

Never mind. After clicking on the line right under Plate 1, the Support tab appeared. After changing the settings and slicing it, it showed what I expected. Thanks for leading me to the solution.
