Snapmaker Space Wiki Index

[Zoe_M]

For Model Creators:

1. Model & Print Profile Upload:

https://wiki.snapmaker.com/en/snapmaker_space/upload_models

Here are the key points of model & Print Profile uploading：

• Combine separated plates/parts where possible.
• Remove competitor names from all settings and keep models away from plate edges.
• For multiple profiles, upload one first and wait for approval before adding more.
• About the 3mf, the filaments should be the Snapmaker or Generic, and the printer preset should be Snapmaker
• The Model Cover and the first pic of the print profile should be the real pic of the print result, and should be without any descriptive text layers.

2. Featured Models & How to Be Featured Model

https://wiki.snapmaker.com/en/snapmaker_space/featured_model_guide

3. How to Make Your Print Profiles Stand Out

https://wiki.snapmaker.com/en/snapmaker_space/How_to_Make_Your_Print_Profiles_Stand_Out

4. Model & Print Profile Review Guide

https://wiki.snapmaker.com/en/snapmaker_space/content_review

For Model Users:

1. Model Browse & Explore

https://wiki.snapmaker.com/en/snapmaker_space/browse_models

2. Model Engagement

https://wiki.snapmaker.com/en/snapmaker_space/engage_with_models

3. Community Engagement

https://wiki.snapmaker.com/en/snapmaker_space/engage_with_models

4. Model Download & Print

At present, the rating trigger and print time calculation will only take effect after the print is successfully sent in Cloud Mode.

https://wiki.snapmaker.com/en/snapmaker_space/downloading_printing_models

5. Ratings after Model Printing

The rating prompt will be triggered after printing is completed, allowing you to share your actual printing results and experience directly.

https://wiki.snapmaker.com/en/snapmaker_space/Rating

6. Points Center