# Snapmaker Original hot end

**URL:** <https://forum.snapmaker.com/t/snapmaker-original-hot-end/31911>\
**Category:** Showcase & Prints\
**Created:** [June 23, 2023, 3:37pm UTC](https://forum.snapmaker.com/t/snapmaker-original-hot-end/31911 "2023-06-23T15:37:07Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Trackjam](https://avatars.discourse-cdn.com/v4/letter/t/a87d85/32.png) [@Trackjam](https://forum.snapmaker.com/u/Trackjam)\
**Post date:** [June 23, 2023, 3:37pm UTC](https://forum.snapmaker.com/t/snapmaker-original-hot-end/31911/1 "2023-06-23T15:37:07Z")

</div>

Good morning  
Is there a supplier for the extruder hot end for the Snapmaker original? Are these parts still being produced?

---

<div class="post-metadata">

**Author:** ![clewis](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/clewis/32/3255_2.png) [@clewis](https://forum.snapmaker.com/u/clewis)\
**Post date:** [June 23, 2023, 6:14pm UTC](https://forum.snapmaker.com/t/snapmaker-original-hot-end/31911/2 "2023-06-23T18:14:49Z")

</div>

You can try emailing [support@snapmaker.com](mailto:support@snapmaker.com) . They have access to parts that aren’t available on the store. You can also check the authorized [store fronts](https://snapmaker.com/where-to-buy) and [distributors](https://snapmaker.com/distributors).

Alternatively, some users have [rebuilt their 2.0 hotend](https://forum.snapmaker.com/t/fyi-snapmaker-2-all-metal-hotend-simple-mod) entirely. It does reuse an existing heat block and electronics though. So depending on what you have, that might not be an option.

If you do find an answer, please let us know. This question has been coming up more often, and I’ve yet to see anybody post a follow up.