# Snapmaker Orca 2.4.0 fails to select Snapmaker U1

**URL:** <https://forum.snapmaker.com/t/snapmaker-orca-2-4-0-fails-to-select-snapmaker-u1/43656>\
**Category:** Snapmaker Orca\
**Tags:** Bug-report\
**Created:** [October 15, 2026, 11:06am UTC](https://forum.snapmaker.com/t/snapmaker-orca-2-4-0-fails-to-select-snapmaker-u1/43656 "2026-10-15T11:06:53Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Account2](https://avatars.discourse-cdn.com/v4/letter/a/3ec8ea/32.png) [@Account2](https://forum.snapmaker.com/u/Account2)\
**Post date:** [October 15, 2026, 11:06am UTC](https://forum.snapmaker.com/t/snapmaker-orca-2-4-0-fails-to-select-snapmaker-u1/43656/1 "2026-10-15T11:06:53Z")

</div>

Steps to reproduce:

1. Start Snapmaker Orca 2.4.0 on Windows
2. Open your model file
3. Go to Device tab
4. Select Snapmaker U1 in the “My Devices” dropdown in the top left corner of the Snapmaker Orca window
5. Go to Prepare tab
6. Slice the model
7. Click “Print-\>Upload and print” or “Print-\>Upload”
8. Select your printer in the “Select Printer” dropdown (the dropdown which says “Click to select printer”
9. Observe that it fails to connect to the printer and does not select any printer

If I instead skip steps 2 and 3, it works as expected: I can open the “Print-\>Upload and print” and select my printer and successfully start the print.

---

<div class="post-metadata">

**Author:** ![Boxkite](https://avatars.discourse-cdn.com/v4/letter/b/df705f/32.png) [@Boxkite](https://forum.snapmaker.com/u/Boxkite)\
**Post date:** [October 15, 2026, 1:58pm UTC](https://forum.snapmaker.com/t/snapmaker-orca-2-4-0-fails-to-select-snapmaker-u1/43656/2 "2026-10-15T13:58:43Z")

</div>

I suggest to try this out on 2.4.1 and report back.

---

<div class="post-metadata">

**Author:** ![MasterPrinter1](https://avatars.discourse-cdn.com/v4/letter/m/f0a364/32.png) [@MasterPrinter1](https://forum.snapmaker.com/u/MasterPrinter1)\
**Post date:** [October 15, 2026, 3:11pm UTC](https://forum.snapmaker.com/t/snapmaker-orca-2-4-0-fails-to-select-snapmaker-u1/43656/3 "2026-10-15T15:11:45Z")

</div>

when it fails, does the device tab itself still show the printer as connected? wondering if the selection sticks or the upload dialog reads a stale entry 🤔

---

<div class="post-metadata">

**Author:** ![Account2](https://avatars.discourse-cdn.com/v4/letter/a/3ec8ea/32.png) [@Account2](https://forum.snapmaker.com/u/Account2)\
**Post date:** [October 15, 2026, 6:25pm UTC](https://forum.snapmaker.com/t/snapmaker-orca-2-4-0-fails-to-select-snapmaker-u1/43656/5 "2026-10-15T18:25:47Z")

</div>

> [@Account2](#):
>
> I suggest to try this out on 2.4.1 and report back.

Works on 2.4.1 alpha

---

<div class="post-metadata">

**Author:** ![Account2](https://avatars.discourse-cdn.com/v4/letter/a/3ec8ea/32.png) [@Account2](https://forum.snapmaker.com/u/Account2)\
**Post date:** [October 15, 2026, 6:26pm UTC](https://forum.snapmaker.com/t/snapmaker-orca-2-4-0-fails-to-select-snapmaker-u1/43656/6 "2026-10-15T18:26:41Z")

</div>

Yes the device tab still shows the printer as connected when it fails.

---

<div class="post-metadata">

**Author:** ![mws](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/mws/32/33569_2.png) [@mws](https://forum.snapmaker.com/u/mws)\
**Post date:** [October 16, 2026, 7:57am UTC](https://forum.snapmaker.com/t/snapmaker-orca-2-4-0-fails-to-select-snapmaker-u1/43656/7 "2026-10-16T07:57:54Z")

</div>

I’ve already reported that issue to support as well. My solution is to use LAN mode. So far, it’s been working great. And the camera is also faster on its own local network.

---

<div class="post-metadata">

**Author:** ![MasterPrinter1](https://avatars.discourse-cdn.com/v4/letter/m/f0a364/32.png) [@MasterPrinter1](https://forum.snapmaker.com/u/MasterPrinter1)\
**Post date:** [October 16, 2026, 2:57pm UTC](https://forum.snapmaker.com/t/snapmaker-orca-2-4-0-fails-to-select-snapmaker-u1/43656/8 "2026-10-16T14:57:22Z")

</div>

ah got it, so the connection itself was fine and the dialog just wasn’t reading it. glad 2.4.1 alpha fixed things 🤞
