# Snapmaker J1 Print bed holder broken

**URL:** <https://forum.snapmaker.com/t/snapmaker-j1-print-bed-holder-broken/28594>\
**Category:** Snapmaker2.0 Troubleshooting guides\
**Created:** [December 26, 2022, 4:10pm UTC](https://forum.snapmaker.com/t/snapmaker-j1-print-bed-holder-broken/28594 "2022-12-26T16:10:55Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![i3sven](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/i3sven/32/20686_2.png) [@i3sven](https://forum.snapmaker.com/u/i3sven)\
**Post date:** [December 26, 2022, 4:10pm UTC](https://forum.snapmaker.com/t/snapmaker-j1-print-bed-holder-broken/28594/1 "2022-12-26T16:10:55Z")

</div>

Hi, everyone,

Yesterday I unpacked the J1 and a part fell out on me.  
At first I couldn’t allocate the defective component, but during a print I notice that the print is slightly different at the back.  
Then I wanted to adjust the bed again and realized that the middle rear part was defective or missing.  
Now I don’t have a secure print bed to print cleanly.

Let’s see if it works, but I just created a spare part via Fusion360.  
Hope it fits.

 ![IMG_20221226_145344](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/d/0/d0c1a305f50a36513db84f8e41140c34d65d6e5a.jpeg)  
 ![IMG_20221226_145339](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/2/a/2aef1b2cf086349ead600ba4a24a452dbf634af3.jpeg)  
 ![IMG_20221225_164131](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/1/0/10d8a894ce774b65ed2d365fdf1feb7a951c831b.jpeg)  
 ![IMG_20221225_164026](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/f/7/f737cd2287d21a52152b6cd9180d487eb798921f.jpeg)

[Snapmaker J1 Mittelteil DruckplatteV1.stl](https://forum.snapmaker.com/uploads/short-url/gleMdHEudl2SQTrKDsaonEOo2oY.stl) (70.2 KB)

---

<div class="post-metadata">

**Author:** ![i3sven](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/i3sven/32/20686_2.png) [@i3sven](https://forum.snapmaker.com/u/i3sven)\
**Post date:** [December 27, 2022, 7:22pm UTC](https://forum.snapmaker.com/t/snapmaker-j1-print-bed-holder-broken/28594/2 "2022-12-27T19:22:25Z")

</div>

@Riskey Riskey

I’m new here, but I would have expected that you would get an answer here if you post something.  
It would be nice if support could get back to you, I tried it via email.  
My previous printers are from Creality and Qidi, the support is quite fast, especially Qidi.

Attached is a corrected STL from the part I uploaded above.

[Snapmaker J1 Mittelteil DruckplatteV1.stl](https://forum.snapmaker.com/uploads/short-url/xOXslBnnTuk2e11VL31SeH4vBVr.stl) (71.2 KB)

Pictures:

 ![Snapmaker J1 Mittelteil DruckplatteV1](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/c/8/c83278ce378598207f87fca917ab103bc637398e.jpeg)  
 ![Snapmaker J1 Mittelteil DruckplatteV1_2](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/6/8/68d90d4a891b04aead93a6426a1b1525062ed0b6.jpeg)  
 ![Snapmaker J1 Mittelteil DruckplatteV1_3](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/0/2/0292a76901df6ad441db36636a3c5ccff7af7589.jpeg)

---

<div class="post-metadata">

**Author:** ![Riskey](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/riskey/32/20010_2.png) [@Riskey](https://forum.snapmaker.com/u/Riskey)\
**Post date:** [December 28, 2022, 8:10am UTC](https://forum.snapmaker.com/t/snapmaker-j1-print-bed-holder-broken/28594/3 "2022-12-28T08:10:49Z")

</div>

Hi i3sven, our support response will be slower than usual during this period due to COVID-19 and Christmas sales. Could you please provide the email you use to contact our support? The email title will also do. We’ll get in touch with you and send you a spare part asap.

---

<div class="post-metadata">

**Author:** ![i3sven](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/i3sven/32/20686_2.png) [@i3sven](https://forum.snapmaker.com/u/i3sven)\
**Post date:** [December 28, 2022, 9:45am UTC](https://forum.snapmaker.com/t/snapmaker-j1-print-bed-holder-broken/28594/4 "2022-12-28T09:45:37Z")

</div>

@Riskey

E-mail subject:  
Snapmaker J1, ein Meisterstück

And Nr.2  
AW: [Request received]  
request (129033)

Thanks
