# Snapmaker Artisan Firmware Updates and Downloads

**URL:** <https://forum.snapmaker.com/t/snapmaker-artisan-firmware-updates-and-downloads/29975>\
**Category:** Update - Artisan(3-in-1)\
**Created:** [March 3, 2023, 9:34am UTC](https://forum.snapmaker.com/t/snapmaker-artisan-firmware-updates-and-downloads/29975 "2023-03-03T09:34:20Z")\
**Posts on this page:** 1\
**Showing post:** 22

<div class="post-metadata">

**Author:** ![Simon\_Zhi](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/simon_zhi/32/30470_2.png) [@Simon\_Zhi](https://forum.snapmaker.com/u/Simon_Zhi)\
**Post date:** [March 14, 2026, 9:18am UTC](https://forum.snapmaker.com/t/snapmaker-artisan-firmware-updates-and-downloads/29975/22 "2026-03-14T09:18:32Z")

</div>

（2026-03-05）

【 **Offical version Firmware】** is ready for Artisan, you can download it.you can download it. The official machine firmware will be push before 2026-2-30.

**Download**

- **EN:[Version：V2.8.0](https://s3.us-west-2.amazonaws.com/snapmaker.com/download/firmware/Artisan_V2.8.0_20260210.bin)** (2026-02-10)

- **CN:[Version：V2.8.0](https://snapmaker.oss-cn-beijing.aliyuncs.com/snapmaker.cn/static/support/%E5%9B%BA%E4%BB%B6/Artisan_V2.8.0_20260210.bin)** (2026-02-10)

**Changelog-**

1. **Added Direct Machine Connection support for Snapmaker Orca.** You can now send G-code to your machine over Wi-Fi without using Luban as a transfer station. Snapmaker Orca communicates directly with your machine through the OctoPrint protocol.

2. **Added a Repeat Job button on the touchscreen.** After a 3D printing, laser, or CNC job finishes, you’ll see an option to repeat the job and start it again with one tap.

- With the beta firmware you no longer need to open Snapmaker Luban first to establish the connection. The only difference from before is the IP-address format, which now becomes: **current device IP:8080** , e.g., **192.168.0.1:8080**.

- For detailed steps, please refer to the WIKI：**[Click here to wiki](https://wiki.snapmaker.com/en/Snapmaker_Orca/manual/orca_qsg)**

\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_

**Known issues**

- When using the single-head dual-nozzle setup for bed-level preheat or XY-offset calibration, uploading & starting a print from Orca will interrupt the calibration.

- Uploading & starting a print from both Snapmaker Luban and Snapmaker Orca at the same time will cause the job to fail.

- In some cases, sending a file via Snapmaker Orca may stick at 0 % upload progress; if this happens, restart the machine and provide logs plus a description of the problem.

- When using the rotary module, the “re-print” function may occasionally restart the job at a different origin.

\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_

# Snapmaker Artisan Firmware

**Mar 6 2026: Snapmaker Artisan V2.8.0**

## Changelog

### Touchscreen

#### New Features

- \*\*Added support for direct network connection between the machine and Snapmaker Orca.\*\*You can now send G-code to your machine over Wi-Fi without using Luban as a transfer station. Snapmaker Orca communicates directly with your machine through the OctoPrint protocol.

- **Added a Repeat Job button on the touchscreen.** Once a 3D printing, laser, or CNC job is complete, you can repeat it with a single tap.

- For step-by-step instructions, please click **[here](https://wiki.snapmaker.com/en/Snapmaker_Orca/manual/orca_qsg)** to view the related Wiki article.

**Known issues**

- When preheating the heated bed or performing XY offset calibration using a single-head dual-nozzle, uploading and starting a print via Snapmaker Orca will interrupt the calibration process.

- Uploading & starting a print from both Snapmaker Luban and Snapmaker Orca at the same time will cause the job to fail.

- In some cases, when sending a file via Snapmaker Orca, the upload progress may remain at 0. If this happens, restart the machine and provide logs plus a description of the problem.

- When using the laser module for a reprint, pausing during the downward movement may result in a failure to return to the origin.

## Downloads

**[Snapmaker Artisan V2.8.0](https://s3.us-west-2.amazonaws.com/snapmaker.com/download/firmware/Artisan_V2.8.0_20260210.bin)**

md5: 7caf49f9b3a5dd0a47448d67e1cf12fe

---

_[View the full topic](https://forum.snapmaker.com/t/snapmaker-artisan-firmware-updates-and-downloads/29975)._
