# SnapMaker 2 Marlin 2 gCode Support

**URL:** <https://forum.snapmaker.com/t/snapmaker-2-marlin-2-gcode-support/5155>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [February 6, 2020, 8:35am UTC](https://forum.snapmaker.com/t/snapmaker-2-marlin-2-gcode-support/5155 "2020-02-06T08:35:47Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![JKC20](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/jkc20/32/5208_2.png) [@JKC20](https://forum.snapmaker.com/u/JKC20)\
**Post date:** [February 7, 2020, 2:00am UTC](https://forum.snapmaker.com/t/snapmaker-2-marlin-2-gcode-support/5155/2 "2020-02-07T02:00:12Z")

</div>

Hi Trek, thank you for your suggestions and we appreciate your input and here is the g-code reference file we have ready as of now for SM1. The g-code reference file for SM2 will be released in a month or two according to the plan. Sorry if the g-code reference file we have now is a bit bare boned, but we will refine it with time. Here is the link to the g-code reference file for SM1.

> **[G-code Reference for Snapmaker](https://docs.google.com/spreadsheets/d/1qDBZTEdHPO59p7PcCulKvBOAjFI-U3O2RyzXJf3Rx6Q/edit#gid=0)**
>
> Sheet1
> 
> G-code ,Format,Reply (example),Function,Parameters,Note
> G0, G1,G0 \[E\] \[F\] \[X\] \[Y\] \[Z\],ok,Linear Move,E: The length of filament to feed into the extruder between the start and end point
> F: The maximum...

---

_[View the full topic](https://forum.snapmaker.com/t/snapmaker-2-marlin-2-gcode-support/5155)._