# Snapmaker 2 Height, Length, Wide

**URL:** <https://forum.snapmaker.com/t/snapmaker-2-height-length-wide/4192>\
**Category:** Snapmaker2.0 Troubleshooting guides\
**Created:** [May 12, 2019, 1:31am UTC](https://forum.snapmaker.com/t/snapmaker-2-height-length-wide/4192 "2019-05-12T01:31:23Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Nailzscott](https://avatars.discourse-cdn.com/v4/letter/n/71c47a/32.png) [@Nailzscott](https://forum.snapmaker.com/u/Nailzscott)\
**Post date:** [May 12, 2019, 1:31am UTC](https://forum.snapmaker.com/t/snapmaker-2-height-length-wide/4192/1 "2019-05-12T01:31:24Z")

</div>

I see on the Snapmaker site the A150 dimensions are 18.5x15x15.4. Are these in order Length, Width, and Height or something different than that - like Height, Length, Width? I am looking at a place where I might fit one but need to know which dimension is which.  
Thanks for any information you can provide.

---

<div class="post-metadata">

**Author:** ![parachvte](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/parachvte/32/2015_2.png) [@parachvte](https://forum.snapmaker.com/u/parachvte)\
**Post date:** [May 13, 2019, 2:47am UTC](https://forum.snapmaker.com/t/snapmaker-2-height-length-wide/4192/2 "2019-05-13T02:47:05Z")

</div>

See the specs below the page, [https://snapmaker.com/platform](https://snapmaker.com/platform).  
A150 is 160x160x145, in width, depth, height order.

---

<div class="post-metadata">

**Author:** ![epoe](https://avatars.discourse-cdn.com/v4/letter/e/7ab992/32.png) [@epoe](https://forum.snapmaker.com/u/epoe)\
**Post date:** [May 13, 2019, 5:19am UTC](https://forum.snapmaker.com/t/snapmaker-2-height-length-wide/4192/3 "2019-05-13T05:19:28Z")

</div>

CNC Work Area A150: 160 x 160 x 90 mm  
One should not have to search such data laboriously!

This website shows the confusion that incomplete information can cause:

> **[Snapmaker 2.0: Millionen für neuen 3D-Drucker bei Kickstarter](https://3druck.com/drucker-und-produkte/snapmaker-20-3d-drucker-kickstarter-3882021/?utm_source=mailpoet&utm_medium=email&utm_campaign=19kw20)**
>
> Der US-Hersteller Snapmaker hat eine Crowdfunding-Kampagne für einen neuen 3D-Drucker bei Kickstarter gestartet. Der modulare 3-in-1 3D-Drucker konnte in

---

<div class="post-metadata">

**Author:** ![Nailzscott](https://avatars.discourse-cdn.com/v4/letter/n/71c47a/32.png) [@Nailzscott](https://forum.snapmaker.com/u/Nailzscott)\
**Post date:** [May 16, 2019, 1:35am UTC](https://forum.snapmaker.com/t/snapmaker-2-height-length-wide/4192/4 "2019-05-16T01:35:18Z")

</div>

Thanks for the information.