# Snapmaker 2 Dual Extruder Issues

**URL:** https://forum.snapmaker.com/t/snapmaker-2-dual-extruder-issues/30921
**Category:** Snapmaker 2.0 (3-in-1)
**Created:** [April 18, 2023, 3:30pm UTC](https://forum.snapmaker.com/t/snapmaker-2-dual-extruder-issues/30921 "2023-04-18T15:30:34Z")
**Posts on this page:** 1
**Showing post:** 4

<div class="post-metadata">

### Author: ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)
#### Post date: [April 18, 2023, 5:58pm UTC](https://forum.snapmaker.com/t/snapmaker-2-dual-extruder-issues/30921/4 "2023-04-18T17:58:15Z")

</div>

The wedge did it for me.  
I printed it with Z +10%.

> [@\[First Batch Shipped Out\] FAQs of Dual Extrusion 3D Printing Module for Snapmaker 2.0](https://forum.snapmaker.com/t/first-batch-shipped-out-faqs-of-dual-extrusion-3d-printing-module-for-snapmaker-2-0/27340/109):
>
> Hallo, @brewery.chump0x Klar teile ich es mit Dir / Euch. Anbei die STL und Auszüge aus der Mail vom Support an mich. Grüße —————————————- Hello, @brewery.chump0x Of course I share it with you. Attached is the STL and excerpts from the email from support to me. Greetings [Block.stl](https://forum.snapmaker.com/uploads/short-url/8a8NaInmjOtKXbU6GoNqt2mv3nR.stl) (158.2 KB)

---

_[View the full topic](https://forum.snapmaker.com/t/snapmaker-2-dual-extruder-issues/30921)._