# Snapmaker 2.0 Firmware Updates and Downloads **URL:** \ **Category:** Update - Snapmaker2.0（3-in-1）\ **Created:** [February 27, 2020, 6:44am UTC](https://forum.snapmaker.com/t/snapmaker-2-0-firmware-updates-and-downloads/5443 "2020-02-27T06:44:50Z")\ **Posts on this page:** 1\ **Showing post:** 32
**Author:** ![Riskey](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/riskey/32/20010_2.png) [@Riskey](https://forum.snapmaker.com/u/Riskey)\ **Post date:** [August 1, 2023, 2:24am UTC](https://forum.snapmaker.com/t/snapmaker-2-0-firmware-updates-and-downloads/5443/32 "2023-08-01T02:24:17Z")
**Jul 27 2023: Snapmaker2\_V1.16.7** Thank you for your suggestions on how to make the Snapmaker 2.0 better. Your feedback is always appreciated. Here comes the latest version of the Snapmaker 2.0 firmware. ### Changelog ## Touchscreen ### Bug Fixes - Fixed a bug that Luban couldn’t switch extruder when was connected to Touchscreen - Fixed a bug that G-code paramenters were replaced when parsing G-code file. ### Downloads [**Snapmaker2\_V1.16.7**](https://s3.us-west-2.amazonaws.com/snapmaker.com/download/firmware/Snapmaker2_V1.16.7.bin) MD5: 7ad04fba6a23e8f2a38c473f176b7a34 > **Notes** > > - This firmware update is only compatible with Snapmaker 2.0. > - To see your current firmware version, go to **Settings** \> **About Machine**. * * * ### How to Update Firmware - Via a USB flash drive - Put the firmware update file **Snapmaker2\_V{version}.bin** in your USB flash drive. - Plug the drive into the Controller. - On the Touchscreen, tap **Files** \> **USB** \> **Snapmaker2\_V{version}.bin**. - Via Wi-Fi - On the Touchscreen, tap **Settings** \> **Firmware Update**. - Read the changelog and download the firmware. - After the firmware is downloaded, tap **Update Now**. --- _[View the full topic](https://forum.snapmaker.com/t/snapmaker-2-0-firmware-updates-and-downloads/5443)._