# Snapmaker 2.0 Firmware Updates and Downloads

**URL:** <https://forum.snapmaker.com/t/snapmaker-2-0-firmware-updates-and-downloads/5443>\
**Category:** Update - Snapmaker2.0（3-in-1）\
**Created:** [February 27, 2020, 6:44am UTC](https://forum.snapmaker.com/t/snapmaker-2-0-firmware-updates-and-downloads/5443 "2020-02-27T06:44:50Z")\
**Posts on this page:** 1\
**Showing post:** 11

<div class="post-metadata">

**Author:** ![Alan](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/alan/32/3418_2.png) [@Alan](https://forum.snapmaker.com/u/Alan)\
**Post date:** [September 1, 2020, 10:29am UTC](https://forum.snapmaker.com/t/snapmaker-2-0-firmware-updates-and-downloads/5443/11 "2020-09-01T10:29:44Z")

</div>

**Sep 1 2020: Snapmaker2\_V1.10.1**

Thank you for your suggestions on how to make the Snapmaker 2.0 better. Here comes the latest version of the Snapmaker 2.0 firmware. Your feedback is always appreciated.

### Changelog:

## Main Controller

### Bug Fixes

1. Fix a bug where the machine stops at 99% when 3D printing.
2. Filament would extrude properly after resuming from Pause or Power-Loss Recovery.

### Improvements

- Thermal protection is optimized to avoid accidental triggers.
- Confirm if Power-Loss Recovery is normal during controller bootup.
- Pre-heat the nozzle to 150℃ before it raises up from the print after resuming from Power-Loss Recovery.
- Lower the initial height of the nozzle after Auto Leveling.
- Raise 3mm for the initial height of the nozzle in Manual Leveling.

### Downloads:

[**Snapmaker2\_V1.10.1**](https://s3-us-west-2.amazonaws.com/snapmaker.com/download/firmware/Snapmaker2_V1.10.1.bin)

MD5: 6addea2ecc4a06ed07c138dfa4b3a502

**Notes:**

This firmware update is only compatible with the Snapmaker 2.0 devices.

You can check the About page for the firmware version after the upgrade.

### How to update Firmware

- via a USB flash drive
  - Put the firmware update file Snapmaker2\_V{version}.bin in your USB flash drive.
  - Plug USB into the USB slot of the Controller.
  - On the touchscreen, tap _Files_ , select the update file under the USB tab to start the update.

- via Wi-Fi
  - Tap _Settings_ -\> _Firmware Update_ on the touch screen.
  - Read the changelog and download the firmware.
  - After the firmware is downloaded, click “Update Now” to start the update.

---

_[View the full topic](https://forum.snapmaker.com/t/snapmaker-2-0-firmware-updates-and-downloads/5443)._