# Snapmaker 2.0 A350T and Lightburn

**URL:** <https://forum.snapmaker.com/t/snapmaker-2-0-a350t-and-lightburn/30198>\
**Category:** Snapmaker Luban\
**Created:** [March 12, 2023, 11:15pm UTC](https://forum.snapmaker.com/t/snapmaker-2-0-a350t-and-lightburn/30198 "2023-03-12T23:15:28Z")\
**Posts on this page:** 1\
**Showing post:** 19

<div class="post-metadata">

**Author:** ![Skreelink](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/skreelink/32/16398_2.png) [@Skreelink](https://forum.snapmaker.com/u/Skreelink)\
**Post date:** [March 27, 2023, 8:12pm UTC](https://forum.snapmaker.com/t/snapmaker-2-0-a350t-and-lightburn/30198/19 "2023-03-27T20:12:25Z")

</div>

I made a pair of guides for that as well. Here’s a collection of guides.

> [@Collection Of Guide Links](https://forum.snapmaker.com/t/collection-of-guide-links/27659):
>
> I figure it might be good to start a topic that sort-of compiles useful guides together to make them easier to find, since the forum doesn’t allow signatures and guides can just disappear into the void. As such, in this first post, I’ll be listing all of the guides I’ve made, be it how to run projects, setup the machine, or repair something. Keep in mind, I don’t want this JUST to be my guides (I’m not the only one with useful information after all!). So I invite others if they’ve written a gui…

---

_[View the full topic](https://forum.snapmaker.com/t/snapmaker-2-0-a350t-and-lightburn/30198)._
