# SM2 Bed Leveling

**URL:** <https://forum.snapmaker.com/t/sm2-bed-leveling/5179>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [February 7, 2020, 4:26pm UTC](https://forum.snapmaker.com/t/sm2-bed-leveling/5179 "2020-02-07T16:26:01Z")\
**Posts on this page:** 1\
**Showing post:** 19

<div class="post-metadata">

**Author:** ![DroneOn](https://avatars.discourse-cdn.com/v4/letter/d/bc8723/32.png) [@DroneOn](https://forum.snapmaker.com/u/DroneOn)\
**Post date:** [February 13, 2020, 5:23pm UTC](https://forum.snapmaker.com/t/sm2-bed-leveling/5179/19 "2020-02-13T17:23:42Z")

</div>

This is on the firmware rev as I received it in the box. Controller v1.6.0.0 and touchscreen v1.5.2.1

---

_[View the full topic](https://forum.snapmaker.com/t/sm2-bed-leveling/5179)._