# SM2.0 ignores certain gcode commands

**URL:** <https://forum.snapmaker.com/t/sm2-0-ignores-certain-gcode-commands/5165>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [February 7, 2020, 1:16am UTC](https://forum.snapmaker.com/t/sm2-0-ignores-certain-gcode-commands/5165 "2020-02-07T01:16:29Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![SchnabsiX](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/schnabsix/32/2622_2.png) [@SchnabsiX](https://forum.snapmaker.com/u/SchnabsiX)\
**Post date:** [February 7, 2020, 9:33am UTC](https://forum.snapmaker.com/t/sm2-0-ignores-certain-gcode-commands/5165/2 "2020-02-07T09:33:06Z")

</div>

As you can see from this G-Code table for Snapmaker it doesn’t seem to use M900.

> [@SnapMaker 2 Marlin 2 gCode Support](http://forum.snapmaker.com/t/snapmaker-2-marlin-2-gcode-support/5155/2):
>
> Hi Trek, thank you for your suggestions and we appreciate your input and here is the g-code reference file we have ready as of now for SM1. The g-code reference file for SM2 will be released in a month or two according to the plan. Sorry if the g-code reference file we have now is a bit bare boned, but we will refine it with time. Here is the link to the g-code reference file for SM1.

---

_[View the full topic](https://forum.snapmaker.com/t/sm2-0-ignores-certain-gcode-commands/5165)._