# Show Us Your Laser Creations! **URL:** \ **Category:** Showcase & Prints\ **Created:** [August 27, 2024, 4:18am UTC](https://forum.snapmaker.com/t/show-us-your-laser-creations/36838 "2024-08-27T04:18:33Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Zoe](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/zoe/32/26962_2.png) [@Zoe](https://forum.snapmaker.com/u/Zoe)\ **Post date:** [August 27, 2024, 4:18am UTC](https://forum.snapmaker.com/t/show-us-your-laser-creations/36838/1 "2024-08-27T04:18:33Z")
Hi everyone! Following our [large prints thread](https://forum.snapmaker.com/t/show-us-your-large-prints/36794), @xchrisd suggested we have a separate one for laser creations so here we go! 😉 Share your laser creations here, along with a brief description. Excited to see what you’ve made! This is my engraving on brass using a 2W IR laser. 🫣 ![2W engrave brass](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/a/d/ade89362f01ee3258cb319be19789dc60cc4fc6c.jpeg) ---
**Author:** ![xchrisd](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/xchrisd/32/1503_2.png) [@xchrisd](https://forum.snapmaker.com/u/xchrisd)\ **Post date:** [August 27, 2024, 10:38am UTC](https://forum.snapmaker.com/t/show-us-your-laser-creations/36838/2 "2024-08-27T10:38:33Z")
Posted 2020 and made with low power 2.0 Laser (I guess) 🙂 Laser, 36h, Best Quality, 10p/mm, 260mm x 155mm, material: formwork panel [DOKA Schalung] ![IMG-20200623-WA0000](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/2X/e/e19550b5d0c210b87e65ef8a7f0f30c3be6c38fe.jpeg) ---
**Author:** ![nsclemmer](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/nsclemmer/32/17843_2.png) [@nsclemmer](https://forum.snapmaker.com/u/nsclemmer)\ **Post date:** [August 27, 2024, 1:20pm UTC](https://forum.snapmaker.com/t/show-us-your-laser-creations/36838/3 "2024-08-27T13:20:56Z")
My Snapmaker 2.0 is always making water bottles. The ones below were made with the 2.0 and the 10W laser. ![Snapchat-676996743](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/e/8/e80cd795f829b93035636754ded53004368529be.jpeg) ![Snapchat-184011343](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/c/8/c84a68a3af3efa394ab3043d8e940b1bfb58c587.jpeg) ![20221209_213055](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/3/e/3e66324c7ae1c69af9b0f5ff6989ffd84163e0af.jpeg) I have been experimenting recently with the 40W laser on stainless steel. Below is some color swatches I made, but I would like to do a larger size. I also have the largest 2D laser sign I’ve made with the 40W just below that. ![1000007323](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/0/f/0f4d3e1f587b3401ac5fd84eeb25db167e1b6ec1.jpeg) ![1000007350](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/8/0/80beb2b5a98d4f37d0b8c17ed540dfb8730b94b1.jpeg) ---
**Author:** ![Skreelink](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/skreelink/32/16398_2.png) [@Skreelink](https://forum.snapmaker.com/u/Skreelink)\ **Post date:** [August 27, 2024, 2:23pm UTC](https://forum.snapmaker.com/t/show-us-your-laser-creations/36838/4 "2024-08-27T14:23:54Z")
13"x13"x3/4" (330.5 x 330.5 x 19mm) baltic birch. Pushing the limits of the A350 past the advertised “320mm” on X 🙂 Notice it overhanging on the left and squared on the right, opposite of what I normally do. ![PXL_20221028_205346659](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/4/4/4438cf0915049a6acf8859f747fa3535c76cae4c.jpeg) ---
**Author:** ![Wyphorn](https://avatars.discourse-cdn.com/v4/letter/w/ebca7d/32.png) [@Wyphorn](https://forum.snapmaker.com/u/Wyphorn)\ **Post date:** [August 27, 2024, 2:56pm UTC](https://forum.snapmaker.com/t/show-us-your-laser-creations/36838/5 "2024-08-27T14:56:22Z")
A Christmas Gift for my family last year. Everybody got a customized dog on front related to their pet. ![signal-2023-12-22-13-46-04-098](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/5/5/5502c5a759f33026a3bcaaecb896829fbbc9dbfc.jpeg) ---
**Author:** ![gbeeton](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/gbeeton/32/11459_2.png) [@gbeeton](https://forum.snapmaker.com/u/gbeeton)\ **Post date:** [August 28, 2024, 10:02pm UTC](https://forum.snapmaker.com/t/show-us-your-laser-creations/36838/6 "2024-08-28T22:02:30Z")
Building the astrolabe involved laser cutting and engraving, cnc carving, as well as traditional woodworking. ![20240608_125232](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/9/4/947051ddb2fcab1735df82b95722d380d53f4da6.jpeg) ![20240608_125314](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/4/9/49e59e3e14d85e8da9ee4ca25a653afe415b8eae.jpeg) ![20240608_125623](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/c/1/c148afdc219b84787e5c08d55de4e6d027c10666.jpeg) ---
**Author:** ![Fileylad12](https://avatars.discourse-cdn.com/v4/letter/f/0ea827/32.png) [@Fileylad12](https://forum.snapmaker.com/u/Fileylad12)\ **Post date:** [September 1, 2024, 6:38pm UTC](https://forum.snapmaker.com/t/show-us-your-laser-creations/36838/7 "2024-09-01T18:38:44Z")
This is our new house sign, Lasered and touched up with Posca paint + sealed 🥹 ![image](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/7/3/73d9bebc6b520581fcd67a3f358c8a55ebc7bd1d.jpeg) ---
**Author:** ![jblane001](https://avatars.discourse-cdn.com/v4/letter/j/67e7ee/32.png) [@jblane001](https://forum.snapmaker.com/u/jblane001)\ **Post date:** [September 2, 2024, 11:56am UTC](https://forum.snapmaker.com/t/show-us-your-laser-creations/36838/8 "2024-09-02T11:56:51Z")
All of these are very cool. I’m particularly interested in the water bottles. Are you using a rotary module to do these? ---
**Author:** ![nsclemmer](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/nsclemmer/32/17843_2.png) [@nsclemmer](https://forum.snapmaker.com/u/nsclemmer)\ **Post date:** [September 2, 2024, 2:22pm UTC](https://forum.snapmaker.com/t/show-us-your-laser-creations/36838/9 "2024-09-02T14:22:00Z")
Yes, I used the rotary module and the 10W laser to make all of these. ---
**Author:** ![jblane001](https://avatars.discourse-cdn.com/v4/letter/j/67e7ee/32.png) [@jblane001](https://forum.snapmaker.com/u/jblane001)\ **Post date:** [September 2, 2024, 9:49pm UTC](https://forum.snapmaker.com/t/show-us-your-laser-creations/36838/10 "2024-09-02T21:49:33Z")
Got it. Thanks. ---
**Author:** ![Marius12313](https://avatars.discourse-cdn.com/v4/letter/m/3be4f8/32.png) [@Marius12313](https://forum.snapmaker.com/u/Marius12313)\ **Post date:** [September 4, 2024, 6:44pm UTC](https://forum.snapmaker.com/t/show-us-your-laser-creations/36838/11 "2024-09-04T18:44:14Z")
![IMG_20240726_112114](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/3/0/3049810b47ffee3542fc6b94e82ece64d9eb83f5.jpeg) easy to make,but cool I think. Made with s.m2 10w ---
**Author:** ![MonkeyHarris](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/monkeyharris/32/27785_2.png) [@MonkeyHarris](https://forum.snapmaker.com/u/MonkeyHarris)\ **Post date:** [September 6, 2024, 5:23pm UTC](https://forum.snapmaker.com/t/show-us-your-laser-creations/36838/12 "2024-09-06T17:23:33Z")
It’s an old one but I’m about to revisit it and make a MKii model. ![20221022_170037](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/b/f/bfc148e5fa6ab461f0f8a991c72c67e1299c8741.jpeg) ![20221105_155744](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/d/b/db3aa1813e9d49d54fa0a6efae0c6196fe17a6ba.jpeg) This is the new design mock-up with removable control panel for different games. ![20240906_165113](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/4/9/49673d2bfea536160a8a096df651ebfac88bdb35.jpeg) ![20240906_165750](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/7/6/7643a73bf5591bf4da8033438209a5b97dfb7a9a.jpeg) ---
**Author:** ![insomniac\_designer](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/insomniac_designer/32/24510_2.png) [@insomniac\_designer](https://forum.snapmaker.com/u/insomniac_designer)\ **Post date:** [September 6, 2024, 7:16pm UTC](https://forum.snapmaker.com/t/show-us-your-laser-creations/36838/13 "2024-09-06T19:16:28Z")
Very cool. I would love to see the new MK2 arcade unit when it’s done. ---
**Author:** ![snapUser](https://avatars.discourse-cdn.com/v4/letter/s/e19b73/32.png) [@snapUser](https://forum.snapmaker.com/u/snapUser)\ **Post date:** [September 7, 2024, 2:28am UTC](https://forum.snapmaker.com/t/show-us-your-laser-creations/36838/14 "2024-09-07T02:28:17Z")
I designed this 1/5 scale 2-player bar table arcade machine. Laser cut acrylic panels and covered in wood grain vinyl for that retro feel. ![IMG_2443](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/3/d/3d37077316d4ac8f0d579e2f121ce5a5f16157e7.jpeg) ![IMG_2299](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/c/c/cc9aa1dbed28507130f9656ae6ceebaf6671b304.jpeg) ![IMG_2332](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/a/b/ab2d17000ba70b14383ccff93a394914ebd5a740.jpeg) ---
**Author:** ![MonkeyHarris](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/monkeyharris/32/27785_2.png) [@MonkeyHarris](https://forum.snapmaker.com/u/MonkeyHarris)\ **Post date:** [September 7, 2024, 7:44am UTC](https://forum.snapmaker.com/t/show-us-your-laser-creations/36838/15 "2024-09-07T07:44:16Z")
Nice ! Love the attention to detail. ---
**Author:** ![insomniac\_designer](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/insomniac_designer/32/24510_2.png) [@insomniac\_designer](https://forum.snapmaker.com/u/insomniac_designer)\ **Post date:** [September 7, 2024, 3:51pm UTC](https://forum.snapmaker.com/t/show-us-your-laser-creations/36838/16 "2024-09-07T15:51:04Z")
Wow! Looks amazing. Is this for personal use or are you selling these? ---
**Author:** ![Robbedoes](https://avatars.discourse-cdn.com/v4/letter/r/82dd89/32.png) [@Robbedoes](https://forum.snapmaker.com/u/Robbedoes)\ **Post date:** [September 8, 2024, 11:28am UTC](https://forum.snapmaker.com/t/show-us-your-laser-creations/36838/17 "2024-09-08T11:28:14Z")
Hi, Like what you created… Nice! What are the dimensions of the Pétanque plate? Looks larger than the build plate (A350) of the SM2.0. ---
**Author:** ![nsclemmer](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/nsclemmer/32/17843_2.png) [@nsclemmer](https://forum.snapmaker.com/u/nsclemmer)\ **Post date:** [September 8, 2024, 8:58pm UTC](https://forum.snapmaker.com/t/show-us-your-laser-creations/36838/18 "2024-09-08T20:58:04Z")
The dimensions were about 15" x 15" for the largest piece on the top. I made this using the Snapmaker Artisan to get that extra space! ---
**Author:** ![Robbedoes](https://avatars.discourse-cdn.com/v4/letter/r/82dd89/32.png) [@Robbedoes](https://forum.snapmaker.com/u/Robbedoes)\ **Post date:** [September 10, 2024, 2:56am UTC](https://forum.snapmaker.com/t/show-us-your-laser-creations/36838/19 "2024-09-10T02:56:21Z")
Ahhhh… I see 😉 Thanks ---
**Author:** ![illuster](https://avatars.discourse-cdn.com/v4/letter/i/da6949/32.png) [@illuster](https://forum.snapmaker.com/u/illuster)\ **Post date:** [September 10, 2024, 9:46pm UTC](https://forum.snapmaker.com/t/show-us-your-laser-creations/36838/20 "2024-09-10T21:46:02Z")
here is my simple celestiscope. It shows the position of the planets and the phases of the moon at any date. It’s operated by manually turning a thumbwheel. [https://www.youtube.com/watch?v=COCu3DEx5ew](https://www.youtube.com/watch?v=COCu3DEx5ew)