# Show Crosshair on 40w laser when framing in lightburn

**URL:** <https://forum.snapmaker.com/t/show-crosshair-on-40w-laser-when-framing-in-lightburn/33496>\
**Category:** Artisan (3-in-1)\
**Created:** [November 5, 2023, 4:54am UTC](https://forum.snapmaker.com/t/show-crosshair-on-40w-laser-when-framing-in-lightburn/33496 "2023-11-05T04:54:22Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![jltPiTTman](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/jltpittman/32/25557_2.png) [@jltPiTTman](https://forum.snapmaker.com/u/jltPiTTman)\
**Post date:** [November 5, 2023, 4:54am UTC](https://forum.snapmaker.com/t/show-crosshair-on-40w-laser-when-framing-in-lightburn/33496/1 "2023-11-05T04:54:22Z")

</div>

Is this possible to turn on in lightburn

---

<div class="post-metadata">

**Author:** ![nweolu](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/nweolu/32/23079_2.png) [@nweolu](https://forum.snapmaker.com/u/nweolu)\
**Post date:** [November 5, 2023, 10:59am UTC](https://forum.snapmaker.com/t/show-crosshair-on-40w-laser-when-framing-in-lightburn/33496/2 "2023-11-05T10:59:40Z")

</div>

Search forum, undocumented g-code commands been shared. Or ask support to update the reference [https://snapmaker.github.io/Documentation/gcode/G000-G001](https://snapmaker.github.io/Documentation/gcode/G000-G001)

---

<div class="post-metadata">

**Author:** ![VaporPhoxxe](https://avatars.discourse-cdn.com/v4/letter/v/c77e96/32.png) [@VaporPhoxxe](https://forum.snapmaker.com/u/VaporPhoxxe)\
**Post date:** [December 7, 2023, 5:05pm UTC](https://forum.snapmaker.com/t/show-crosshair-on-40w-laser-when-framing-in-lightburn/33496/3 "2023-12-07T17:05:10Z")

</div>

For the Artisan use the following;

Crosshair On; M2000 L13 P1  
Crosshair Off; M2000 L13 P0

For the Snapmaker use the following;

Crosshair On: M2002 T3 P1  
Crosshair Off: M2002 T3 P0

---

<div class="post-metadata">

**Author:** ![mgoetzke](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/mgoetzke/32/19959_2.png) [@mgoetzke](https://forum.snapmaker.com/u/mgoetzke)\
**Post date:** [March 27, 2024, 8:17am UTC](https://forum.snapmaker.com/t/show-crosshair-on-40w-laser-when-framing-in-lightburn/33496/4 "2024-03-27T08:17:24Z")

</div>

How can i tell lightburn to use these while framing ?

I found it under console ‘crosshair on’.