# Set-up for rotary engraving on tumblers

**URL:** <https://forum.snapmaker.com/t/set-up-for-rotary-engraving-on-tumblers/34646>\
**Category:** Artisan (3-in-1)\
**Tags:** Laser\
**Created:** [January 22, 2024, 9:01am UTC](https://forum.snapmaker.com/t/set-up-for-rotary-engraving-on-tumblers/34646 "2024-01-22T09:01:22Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![J-DeP](https://avatars.discourse-cdn.com/v4/letter/j/a698b9/32.png) [@J-DeP](https://forum.snapmaker.com/u/J-DeP)\
**Post date:** [January 22, 2024, 9:01am UTC](https://forum.snapmaker.com/t/set-up-for-rotary-engraving-on-tumblers/34646/1 "2024-01-22T09:01:22Z")

</div>

I am a BRAND NEW user of the Snapmaker laser engraver. I have the Artisan 3 in 1 with the rotary module. Can anyone suggest a good reliable set-up for engraving tumblers?

---

<div class="post-metadata">

**Author:** ![Noriek](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/noriek/32/32997_2.png) [@Noriek](https://forum.snapmaker.com/u/Noriek)\
**Post date:** [May 25, 2025, 1:31am UTC](https://forum.snapmaker.com/t/set-up-for-rotary-engraving-on-tumblers/34646/2 "2025-05-25T01:31:05Z")

</div>

![20250525_074751](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/9/c/9c0ef7842ac26a19bb9cfb0f1f7d5eb0865d3bc4.jpeg)  
Hi Not sure if picture copied ok But after a bit of trial and error  
Using Artisan 3 in 1 with Rotary and 40 wat laser. Very happy with  
10% power, speed of 150, 1/2 diode on , no constant power , air assist on.  
Slow but sure, will try with fster speed and such later