# Sending g-code then printing changed

**URL:** <https://forum.snapmaker.com/t/sending-g-code-then-printing-changed/19421>\
**Category:** Snapmaker Luban\
**Created:** [June 23, 2021, 2:02am UTC](https://forum.snapmaker.com/t/sending-g-code-then-printing-changed/19421 "2021-06-23T02:02:37Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![stewl](https://avatars.discourse-cdn.com/v4/letter/s/e5b9ba/32.png) [@stewl](https://forum.snapmaker.com/u/stewl)\
**Post date:** [June 23, 2021, 9:01pm UTC](https://forum.snapmaker.com/t/sending-g-code-then-printing-changed/19421/2 "2021-06-23T21:01:36Z")

</div>

Changed it without telling anybody or asking what they wanted.  
Suggestion was it would be fixed in next release,

> [@Workflow Changed in Firmware V1.12.0](https://forum.snapmaker.com/t/workflow-changed-in-firmware-v1-12-0/17717):
>
> Some users have reported the workflow change in Snapmaker Firmware V1.12.0. [New Firmware for A350: Why changed dialogue?](https://forum.snapmaker.com/t/new-firmware-for-a350-why-changed-dialog/17551) For Firmware 1.12.0, this is a transition phase to the Rotary Module. The workflow of transferring the file via Wi-Fi will be improved in the next version of Snapmaker Firmware. The touchscreen will not ask you to start the work but inform you the file has been transferred successfully after you send the file to the machine. After you tap “OK” on the touchscreen, you will …

---

_[View the full topic](https://forum.snapmaker.com/t/sending-g-code-then-printing-changed/19421)._
