# Rotary attachment laser engraver

**URL:** <https://forum.snapmaker.com/t/rotary-attachment-laser-engraver/2676>\
**Category:** Snapmaker2.0 Troubleshooting guides\
**Created:** [May 15, 2018, 4:37pm UTC](https://forum.snapmaker.com/t/rotary-attachment-laser-engraver/2676 "2018-05-15T16:37:42Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![lucaspedroni](https://avatars.discourse-cdn.com/v4/letter/l/db5fbb/32.png) [@lucaspedroni](https://forum.snapmaker.com/u/lucaspedroni)\
**Post date:** [May 15, 2018, 4:37pm UTC](https://forum.snapmaker.com/t/rotary-attachment-laser-engraver/2676/1 "2018-05-15T16:37:43Z")

</div>

Hi folks! How are you? I’d like to know if there is any tutorial about how to set and use that rotary attachment for laser engraving that you can find at thingiverse. Thanks!

---

<div class="post-metadata">

**Author:** ![PrintingDog](https://avatars.discourse-cdn.com/v4/letter/p/a87d85/32.png) [@PrintingDog](https://forum.snapmaker.com/u/PrintingDog)\
**Post date:** [May 16, 2018, 7:16am UTC](https://forum.snapmaker.com/t/rotary-attachment-laser-engraver/2676/2 "2018-05-16T07:16:12Z")

</div>

> [@lucaspedroni](#):
>
> find at thingiverse

Could you please send the link to the thing?

---

<div class="post-metadata">

**Author:** ![PrintingDog](https://avatars.discourse-cdn.com/v4/letter/p/a87d85/32.png) [@PrintingDog](https://forum.snapmaker.com/u/PrintingDog)\
**Post date:** [May 16, 2018, 7:22am UTC](https://forum.snapmaker.com/t/rotary-attachment-laser-engraver/2676/3 "2018-05-16T07:22:50Z")

</div>

> [@lucaspedroni](#):
>
> rotary attachment

Sorry, I found it. It’s a good idea but needs much adjustments to get the right space between the rollers for the dimension of the cylinder you are engraving

---

<div class="post-metadata">

**Author:** ![Sean-LeiLi](https://avatars.discourse-cdn.com/v4/letter/s/e274bd/32.png) [@Sean-LeiLi](https://forum.snapmaker.com/u/Sean-LeiLi)\
**Post date:** [May 16, 2018, 10:28am UTC](https://forum.snapmaker.com/t/rotary-attachment-laser-engraver/2676/4 "2018-05-16T10:28:27Z")

</div>

See the video at [https://www.facebook.com/groups/snapmaker/permalink/431292607289058/](https://www.facebook.com/groups/snapmaker/permalink/431292607289058/)  
Hope this could help you.

---

<div class="post-metadata">

**Author:** ![lucaspedroni](https://avatars.discourse-cdn.com/v4/letter/l/db5fbb/32.png) [@lucaspedroni](https://forum.snapmaker.com/u/lucaspedroni)\
**Post date:** [May 16, 2018, 5:59pm UTC](https://forum.snapmaker.com/t/rotary-attachment-laser-engraver/2676/5 "2018-05-16T17:59:52Z")

</div>

Yes, it helped me a lot. There is a simple explanation from the designer in the comments of the video.

Thanks!