# Roses In Corian

**URL:** <https://forum.snapmaker.com/t/roses-in-corian/25545>\
**Category:** Showcase & Prints\
**Created:** [April 27, 2022, 12:24am UTC](https://forum.snapmaker.com/t/roses-in-corian/25545 "2022-04-27T00:24:47Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Skreelink](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.snapmaker.com/skreelink/32/16398_2.png) [@Skreelink](https://forum.snapmaker.com/u/Skreelink)\
**Post date:** [April 27, 2022, 12:24am UTC](https://forum.snapmaker.com/t/roses-in-corian/25545/1 "2022-04-27T00:24:47Z")

</div>

I’ve done laser engraves on this red solid surface before, but I wanted to see how well the 10W works. This was done at 2000mm/m, 0.15mm interval.

 ![PXL_20220427_001407115](https://us1.discourse-cdn.com/flex022/uploads/snapmaker/original/3X/b/f/bfcad7c97e078c5c290ae0afca3641df2df1861b.jpeg)
