Hi , hat noch jemand das Problem das die Köpfe seit Version 1.5 beim Wipen in die Platte kracht ? Geh ich auf 1.4.1 ist es weg. 2 Düsen und die Platte sind schon kaputt. Hab schon alles neu kalibriert usw. Liegt wirklich an der 1.5

Should be solved: [image] Firmware 1.5.0 - Print Quality Degraded After Update (Improved After Downgrade + Full Recalibration) U1 Troubleshooting guides Hi, the reported issues should be fixed by the newly-released 1.5.1 version: V1.5.1 | Snapmaker Wiki . It woul…

Egal welcher Kopf. Selbst wenn ich nur das Bett leveln will übers Menü …. Mit 1.4.1 ist es sofort weg

Hi, thanks for the feedback. It would be highly appreciated if you could submit a support ticket: https://snapmaker.formcrafts.com/u1-troubleshooting-request

You’re not alone. Here’s a thread on Reddit with a similar issue (nozzle too close to the bed): https://www.reddit.com/r/snapmaker/comments/1uksadr/firmware_update_15_problems/ As well as two comments in the same spirit on the official release announcement: https://www.reddit.com/r/snapmaker/comm…

Is Not the Same Problem. They have Problem with the Z Offset … I have See this … I have Change to my standart of 0,08 , and Change nothing…. Only when I Go back to 1.4.1 it works

我倒是没有撞头问题，但是有打印的变成一坨的问题。我感觉应该是Z轴高度离打印板过高了。效果像极了挤出的比例过多。手动+自动调平后没任何改善，恢复了1.41就好了。

I observed that the problem was resolved when I set the z-offset value to 0.25.

Major problem with firmware update 1.5

U1 Toolchanger

xchrisd July 3, 2026, 6:17pm 8

Should be solved:

Topic		Replies	Views
Firmware 1.5.0 - Print Quality Degraded After Update (Improved After Downgrade + Full Recalibration) U1 Troubleshooting guides	39	907	July 20, 2026
U1 Firmware V1.5.2 Beta Testing is Now Available U1 Toolchanger	31	1345	July 27, 2026
Support Center, Firmware, Software & App Updates Update - U1 Toolchanger Firmware , Update	39	5829	April 21, 2026
Snapmaker U1 macht plötzlich Probleme U1 Toolchanger	16	308	July 7, 2026
Sherrys post in Discord "About First-Layer Issues What Affects First-Layer Quality" U1 Troubleshooting guides	7	121	July 31, 2026

Major problem with firmware update 1.5

Related topics