# Reset to factory settings?

**URL:** <https://forum.snapmaker.com/t/reset-to-factory-settings/23058>\
**Category:** Snapmaker 2.0 (3-in-1)\
**Created:** [December 29, 2021, 9:01pm UTC](https://forum.snapmaker.com/t/reset-to-factory-settings/23058 "2021-12-29T21:01:10Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![sr71shark](https://avatars.discourse-cdn.com/v4/letter/s/bb73d2/32.png) [@sr71shark](https://forum.snapmaker.com/u/sr71shark)\
**Post date:** [December 29, 2021, 9:01pm UTC](https://forum.snapmaker.com/t/reset-to-factory-settings/23058/1 "2021-12-29T21:01:10Z")

</div>

I’m having an issue with the Snapmaker 2.0 A350 and would like to try resetting to factory settings. Is there a way to do this? I have tried reverting firmware, I have tried upgrading firmware, and still having the issue. Is there another way to reset settings that I’m missing? I looked through the entire menu on the touchscreen, but haven’t found anything yet.

---

<div class="post-metadata">

**Author:** ![minhhh](https://avatars.discourse-cdn.com/v4/letter/m/aeb1de/32.png) [@minhhh](https://forum.snapmaker.com/u/minhhh)\
**Post date:** [September 6, 2022, 4:39am UTC](https://forum.snapmaker.com/t/reset-to-factory-settings/23058/2 "2022-09-06T04:39:46Z")

</div>

> [@sr71shark](#):
>
> s? I have tried reverting firmware, I have tried upgrading firmware, and still having the issue. Is there another way to reset settings that I’m missing? I looked through the entire menu on the touchscreen, but haven’t found anything yet.

have you figured this out? I need to do this on mine

---

<div class="post-metadata">

**Author:** ![CNC-Maker](https://avatars.discourse-cdn.com/v4/letter/c/df788c/32.png) [@CNC-Maker](https://forum.snapmaker.com/u/CNC-Maker)\
**Post date:** [September 6, 2022, 6:02am UTC](https://forum.snapmaker.com/t/reset-to-factory-settings/23058/3 "2022-09-06T06:02:40Z")

</div>

To perform a **Full Factory Reset** to the currently installed version of firmware, you need to **Factory Reset** both the **Touch Pad** and the **Controller** :

1. Connect your computer to the **Controller** via USB (must be USB).
2. Issue an `M502` factory reset to the **Controller**.
3. Put the **Touch Pad** into **Developer Mode**. This is done via the **About** page, and tapping the printer image 5 times. You’ll see a popup window when it changes modes.
4. Reset and clear out the **Touch Pad**. You will need to navigate around to find this, as it seems to change with each version of firmware.
5. Reinstall the currently installed version of firmware from a USB drive (must be from a USB drive). All versions of the firmware are available in the [Snapmaker 2.0 Firmware Updates and Downloads](https://forum.snapmaker.com/t/snapmaker-2-0-firmware-updates-and-downloads/5443) thread.
6. Update all of the modules.